Structural Engineering

1. 2014 – Till date: Assistant Professor in Department of Civil Engineering VSSUT, Burla
2. 2010-2013: Senior Research Fellow in Department of Civil Engineering at IIT Kharagpur.
3. 2006-2008: Design Engineer in ARKI Techno Consultants (India) Pvt. Ltd., Bhubaneswar

Graduate Level	:	Advanced Concrete Design Estimation and Professional Practice Steel Structures Civil Engineering Material and Construction Concrete Technology
Post Graduate Level	:	Advanced Structural Analysis, Earthquake Analysis and Design, CAD Lab

1. Development and characterization of cement-less concrete using waste materials.
2. Sustainability and LCA of Construction Materials.
3. Vibration based structural damage assessment using swarm intelligence techniques.
4. Controlling Structural Vibration using Tuned Liquid Damper.
5. Shear strengthening of RC beams using deep embedded reinforcements.

Ph. D. Candidates	:	01
M. Tech. Candidates	:	07

1. NIL

Associate Member of Institution of Engineers (India)

1. Sponsored Research Projects:
2. FRP shear strengthening of damaged concrete beams subjected to fatigue loading; Funding Agency: UGC- UKIERI. (Co-PI)
3. Modernization of structural engineering laboratory, Funding Agency: AICTE- MODROB. (Co-PI)
4. Utilization of coconut fibre as reinforcing material in concrete; Funding Agency: VSSUT- TEQIP. (PI)
5. Major Consultancy Services:
6. Vetting of Structural Plan, Design and Detailing of Phase VI And VII, Multi-Storey Residential Apartment at Dumduma, Bhubaneswar; Agency: OSHB, Bhubaneswar; Cost of Consultancy: Rs. 7.3 Lakh. (Co Consultant).
7. Vetting of Structural Plan and Design of Multi-Storey Residential Building at Angul Town, Agency: OSHB, Bhubaneswar; Cost of Consultancy: Rs. 5.1 Lakh. (Co Consultant).
8. Vetting of plan and design of Proposed Composite Office Building for SMC & SDA; Agency: SMC, Sambalpur; Cost of Consultancy: Rs. 1 Lakh. (Consultant).
9. Time motion study of MNREGA projects in Odisha; Agency: PR Department, Govt. of Odisha; Cost of Consultancy: Rs. 7.5 Lakh. (Co Consultant).
10. Vetting of Structural Design of 28-E Type Qtrs. for Reserve Office at Sambalpur; Agency: OPHWC, Sambalpur; Cost of Consultancy: Rs. 1 Lakh. (Co Consultant).
11. Vetting of Drawings and Design for Improvement of Water Supply to Burla Town (Balance work); Agency: EE, PH Division, Sambalpur; Cost of Consultancy: Rs. 2.2 Lakh. (Co Consultant).
12. Vetting of Drawings and Design for Improvement of Water Supply to Padampur Town; Agency: EE, PH Division, Sambalpur; Cost of Consultancy: Rs. 1.9 Lakh. (Co Consultant).

International Publications

1. J. Mishra, B. Nanda, S.K. Patro, R.S. Krishna (2022). "Sustainable Fly Ash Based Geopolymer Binders: A Review on Compressive Strength and Microstructure Properties." Sustainability, Vol. 14, No. 22, pp. 15062:1-41. https://doi.org/10.3390/su142215062.
2. J. Mishra, B. Nanda, S.K. Patro, S.K. Das, S.M. Mustakim (2022). "Influence of ferrochrome ash on mechanical and microstructure properties of ambient cured fly ash based geopolymer concrete." Journal of Material Cycles and Waste Management. Vol. 24, No. 3, pp. 1095-1108. https://doi.org/10.1007/s10163-022-01381-1.
3. S.S. Mohapatro, J. Mishra, B. Nanda, S.K. Patro (2022). "A review on waste-derived alkali activators for preparation of geopolymer composite." Materials Today: Proceedings, Vol. 56, No. 1, pp. 440-446. https://doi.org/10.1016/j.matpr.2022.01.400.
4. B. Dutta, A.N. Nayak, B. Nanda, S. Dirar (2022). "Reinforced concrete deep beam shear retrofitted with deep embedded bar: a numerical investigation." Materials Today: Proceedings, Vol. 60, No. 1, pp. 281-287. https://doi.org/10.1016/j.matpr.2021.12.563.
5. J. Mishra, B. Nanda, S.K. Patro, S.K. Das, S.M. Mustakim (2022), "Strength and microstructural characterization of ferrochrome ash and ground granulated blast furnace slag based geopolymer concrete." Journal of Sustainable Metallurgy, Vol.8, pp. 156-169. https://doi.org/10.1007/s40831-021-00469-6.
6. J. Mishra, B. Nanda, S.K. Patro (2021), "Geopolymer composites for smart and sustainable infrastructure: A review." NICMAR Journal of Construction Management, Vol. 36, No. 4, pp. 50-57.
7. R.S. Krishna, J Mishra, B. Nanda, S.K. Patro, A. Adetayo, T.S. Qureshi (2021), "The role of graphene and its derivatives in modifying different phases of geopolymer composites: A review." Construction and Building Materials, Vol. 306, 124774, pp. 1-21. https://doi.org/10.1016/j.conbuildmat.2021.124774
8. B. Nanda, S. Rout (2021), "Properties of concrete containing fly ash and bottom ash mixture as fine aggregate." International Journal of Sustainable Engineering, Vol. 14, No. 4, pp. 809-819. https://doi.org/10.1080/19397038.2021.1920641
9. B. Nanda, D. Maity, D.K. Maity (2021). "Element damage assessment in semi rigid connected structures using modal domain data." International Journal of Structural Engineering , Vol. 11, No. 1, pp. 44-62. https://doi.org/10.1504/IJSTRUCTE.2021.112092
10. S. Upadhyaya, B. Nanda, R. Panigrahi (2020). "Effect of Granite Dust as Partial Replacement to Natural Sand on Strength and Ductility of Reinforced Concrete Beams." Journal of The Institution of Engineers (India): Series A, Vol. 101, pp. 669-677. https://doi.org/10.1007/s40030-020-00472-2
11. A. Majumdar, B. Nanda (2020). "A Comparative Study on Inverse Vibration Based Damage Assessment Techniques in Beam Structure Using Ant Colony Optimization and Particle Swarm Optimization." Advanced Science, Engineering and Medicine, Vol. 12, pp. 918–923.
12. J. Mishra, S.K. Das, R.S. Krishna, B. Nanda (2020). "Utilization of ferrochrome ash as a source material for production of geopolymer concrete for a cleaner sustainable environment." Indian Concrete Journal, Vol. 94, No. 7, pp. 40-49.
13. J. Mishra, S.K. Das, R.S. Krishna, B. Nanda, S.K. Patro, S.M. Mustakim (2020). "Synthesis and characterization of a new class of geopolymer binder utilizing ferrochrome ash (FCA) for sustainable industrial waste management." Materials Today: Proceedings, Vol. 33, pp. 5001-5006. https://doi.org/10.1016/j.matpr.2020.02.832.
14. A. Majumdar, B. Nanda, D. Maity, D.K. Maiti (2014). “Structural damage detection based on modal parameters using continuous ant colony optimization.” Advances in Civil Engineering, Article Id. 174185, pp. 1- 14. https://doi.org/10.1155/2014/174185.
15. B. Nanda, D. Maity, D.K. Maity (2014). “Damage assessment from curvature mode shape using unified particle swarm optimization.” Structural Engineering and Mechanics, Vol. 52, No. 2, pp. 307-322. http://dx.doi.org/10.12989/sem.2014.52.2.307.
16. A. Agarwal, B. Nanda, D. Maity (2014). “Experimental investigation on chemically treated bamboo reinforced concrete beams and columns.” Construction and Building Materials, Vol. 71, pp. 610-617. https://doi.org/10.1016/j.conbuildmat.2014.09.011 .
17. B. Nanda, A. Majumdar, D. Maity, D.K. Maiti (2014). “Performance comparison among vibration based indicators in damage identification of structures.” Applied Mechanics and Materials, Vol. 592, pp. 2081-2085. https://doi.org/10.4028/www.scientific.net/AMM.592-594.2081.
18. B. Nanda, D. Maity, D.K. Maity (2014), “Modal parameter based inverse approach for structural joint damage assessment using unified particle swarm optimization.” Applied Mathematics and Computation, Vol. 242, pp. 407-422. https://doi.org/10.1016/j.amc.2014.05.115.
19. B. Nanda, D. Maity, D.K. Maity (2014). “Crack assessment in frame structures using modal data and unified particle swarm optimization technique.” Advances in Structural Engineering, Vol. 17, No. 5, pp. 747-768. https://doi.org/10.1260%2F1369-4332.17.5.747.
20. B. Nanda, D. Maity, D.K. Maity (2012). “Vibration-based structural damage detection technique using particle swarm optimization with incremental swarm size.” International Journal of Aeronautical and Space Sciences, Vol. 13, No. 3, pp. 323-331. https://doi.org/10.5139/IJASS.2012.13.3.323.

International Conferences

1. B. Dutta, A.N. Nayak, B. Nanda, S. Dirar (2022), "Nonlinear FE Model for shear strengthening of Simply supported RC beams with FRP DE-bars." at: 12th Structural Engineering Convention (SEC 2022), 19-22 Dec. 2022, Malaviya National Institute of Technology, Jaipur. https://doi.org/10.38208/acp.v1.721.
2. G.R. Patil, K.D. Singh, B. Nanda (2022), "Mitigating structural vibrations due to earthquake with application of slope bottom tuned liquid dampers." at: 12th Structural Engineering Convention (SEC 2022), 19-22 Dec. 2022, Malaviya National Institute of Technology, Jaipur. https://doi.org/10.38208/acp.v1.554.
3. S.S. Mohapatra, J. Mishra, B. Nanda, S.K. Patro, (2022), A review on waste-derived alkali activators for preparation of geopolymer composite, at: International Conference on Materials, Machines & Information Technology (ICMMIT- 2022), 24-25 Jan. 2022.
4. B. Dutta, A.N. Nayak, B. Nanda, S. Dirar (2021). "Reinforced concrete deep beam shear retrofitted with deep embedded bar: a numerical investigation." at: International Conference on Sustainable Materials and Practices for Built Environment (SMPBE-2021). 25-26 Nov. 2021, Jaipur, Rajasthan.
5. R.S. Krishna, J. Mishra, S.K. Das, B. Nanda, S.K. Patro, S.M. Mustakim, (2021). A Review on Potential of Graphene Reinforced Geopolymer Composites, at: International Symposium on Materials of the Millennium: Emerging Trends and Future Prospects (MMETFP-2021), 19-21 Nov. 2021, Gandhi Nagar, Gujarat.
6. J. Mishra, S.K. Das, B. Nanda, S.K. Patro, S.M. Mustakim (2021). "Ferrochrome ash-based geopolymer concrete incorporating fly ash and lime water." at: 10th International Conference on Sustainable Waste Management towards Circular Economy (ICSWMCE- 2020) , 2-5 Dec. 2020, Jadavpur University, Kolkata.
7. P.P. Sahu, B. Nanda, S.K. Patro (2020). "Rapid Vulnerability Assessment using Artificial Neural Network." at: International Conference on Disaster Mitigation and Management in Global Context. 7-8 Mar. 2020, The Institution of Engineers (India), Odisha state center, Bhubaneswar.
8. S. Mishra, A. Majumdar, B. Nanda (2020)."Vibration Based Damage Assessment Technique in Beam Structures using Firefly Algorithm." at: International Conference on Aviation Technology: current scenario (AeSI-2020), 6-7 Mar. 2020, Techno Main, Saltlake, Kolkata.
9. J. Mishra, R.S. Krishna, S.K. Das, B. Nanda, S.K. Patro, S.M. Mustakim (2019). "Graphene reinforced geopolymer composites for smart and sustainable future - a meta-analytic review." at: 2nd International Conference on Processing and Characterization of Materials (ICPCM-2019), 12-14 Dec. 2019, National Institute of Technology, Rourkela.
10. J. Mishra, S.K. Das, R.S. Krishna, B. Nanda, S.K. Patro, S.M. Mustakim (2019). "Synthesis and characterization of a new class of geopolymer binder utilizing ferrochrome ash (FCA) for sustainable industrial waste management." at: 2nd International Conference on Processing and Characterization of Materials (ICPCM-2019), 12-14 Dec. 2019, National Institute of Technology, Rourkela.
11. J. Mishra, S.K. Das, B. Nanda, S.K. Patro, S.M. Mustakim (2019). “Sustainable use of ferrochrome ash (FCA) in the production of ambient cured geopolymer concrete containing GGBFS, fly ash: An Industrial Solid Waste Management (ISWM) Strategy.” at: 9th International Conference on Sustainable Waste Management towards Circular Economy (ICSWMCE- 2019). 27-30 Nov. 2019, Kalinga Institute of Industrial Technology, Bhubaneswar.
12. B. Dutta, K. Sogut, A.N. Nayak, S. Dirar, B. Nanda, M. Theofanous, A. Faramarzi (2019). “Nonlinear Finite Element Analysis of Reinforced Concrete Beams Strengthened with Embeded Steel Bars.” at: International Conference on Advanced Composites in Construction (AICC 2019). 3-5 Sep. 2019, University of Birmingham, UK.
13. G.R. Patil, K.D. Singh, B. Nanda (2018). "Performance of TLD with different slope profiles utilised to mitigate dynamic response of structure." at: 11th Structural Engineering Convention (SEC-2018), 19-21 Dec. 2018, Jadavpur University, India.
14. S. Upadhyaya, B. Nanda, R.K. Panigrahi (2018). “Study on flexural behaviour RC beams made using sand partially replaced by granite dust.” at: 11th Structural Engineering Convention (SEC-2018), 19-21 Dec. 2018, Jadavpur University, India.
15. S. Upadhyaya, R.K. Panigrahi, B. Nanda (2018). “Experimental analysis of partial replacement of fine aggregate by granite dust in concrete.” at: International Conference on Sustainable Construction and Building Materials (SCBM 2018), 18-22 Jun. 2018, National Institute of Technology, Surathkal.
16. G.R. Patil, K.D. Singh, B. Nanda (2017). “A study on sloped bottom tuned liquid damper for controlling dynamic response of buildings.” at: 13th International conference on vibration problems (ICOVP), 29 Nov. – 02 Dec. 2017, Indian Institute of Technology, Guwahati.
17. G.R. Patil, K.D. Singh, B. Nanda (2016). “Evaluation of slopped bottom tuned liquid damper for mitigation of dynamic response of structure.” at: 9th Structural Engineering Convention (SEC 2016), 21-23 Dec. 2016, CSIR- SERC, Chennai.
18. Jebieshia T.R., B. Nanda, D.K. Maiti, D. Maity (2014). “Free Vibration Characteristics and Damage Assessment of Composite Structures.” at: International Conference on Theoretical, Applied, Experimental and Computational Mechanics (ICTACEM 2014). 29-31 Dec. 2014, Indian Institute of Technology, Kharagpur.
19. B. Nanda, R. Anand, D.K. Maiti (2014). “Frequency based Inverse Damage Assessment Technique using Novel Hybrid Neuro-Particle Swarm Optimization.” at: International Conference on Computational Intelligence in Data Mining (ICCIDM-2014). 20-21 Dec. 2014, Veer Surendra Sai University of Technology, Burla.
20. B. Nanda, Jebieshia T.R., D.K. Maiti, D. Maity (2014). “Damage Assessment of Composite Structures from Changes in Natural Frequency using Unified Particle Swarm Optimization.” at: 5th International Congress on Computational Mechanics and Simulation (ICCMS-2014). 10-13 Dec. 2014, Structural Engineering Research Center, Chennai.
21. B. Nanda, A. Majumdar, D. Maity, D.K. Maity (2014). “Performance comparison among vibration based indicators in damage identification of structures.” at: International Mechanical Engineering Congress (IMEC- 2014). 13-15 Jun. 2014, National Institute of Technology, Tiruchirappalli.
22. A. Majumdar, B. Nanda, D. Maity, D.K. Maity (2012). “Optimal Sensor Placement for Damage Detection Using Continuous Ant Colony Optimization Technique.” at: 4th International Congress on Computational Mechanics and Simulation (ICCMS 2012). 9-12 Dec. 2012, Indian Institute of Technology, Hyderabad.
23. B. Nanda, D. Maity, D.K. Maity (2012). “Damage Assessment of Beam Structures from Change in Curvature Mode Shape using Unified Particle Swarm Optimization Technique.” at: 4th International Congress on Computational Mechanics and Simulation (ICCMS 2012). 9-12 Dec. 2012, Indian Institute of Technology, Hyderabad.
24. B. Nanda, K.C. Biswal (2011). “Application of Tuned Liquid Damper for Controlling Structural Vibrations Due to Earthquake Excitations.” at: 6th International Structural Engineering and Construction Conference (ISEC 6). 21- 26 Jun. 2011, Zürich, Switzerland.

National Conferences

1. J. Mishra, B. Nanda , S.K. Patro (2020). “Geopolymer Concrete: A Pathway to Sustainable Manufacturing in the Indian Concrete Industry.”, at: 35th Indian Engineering Congress, 18-20 Dec. 2020, Institution of Engineers, Kolkata.
2. R.L. Sahu, R.R. Dash, P.K. Pradhan, B. Nanda (2019), "Prediction of turbidity removal efficiency caused by river bank filtration based on hydro-geological factors using artificial neural network", at: National conference on Trends in Mineral and Material Technology (MMT 2019). 30th Oct. 2019, Siksha 'O' Anusandhan, Bhubaneswar.
3. S. Upadhyaya, B. Nanda (2019). “Coconut Fibre Reinforced Concrete”, at: National Conference on Advances in Structural Technologies (COAST 2019). 1-3 Feb. 2019, National Institute of Technology, Silchar, Assam, India.
4. A. Majumdar, B. Nanda (2019). “A comparative study on inverse vibration based damage assessment technique in beam structures using PSO and ACO”, at: 1st National Conference on Advances in Mechanical Engineering (NCAME 2019). 16th Mar. 2019, National Institute of Technology, Delhi.
5. R. Bhushan, B. Nanda, D. Maity, A.K. Samanta (2014). “Structural Damage Assessment using Vibration Data and Hybrid Particle Swarm Gravitational Search Algorithm”, at: National Conference on Innovations in Design & Construction of Industrial Structures (IDCIS 2014), 3-5 Apr. 2014, National Institute of Technology, Durgapur.
6. A. Majumdar, B. Nanda, D. Maity, D.K. Maiti (2011). “Damage Assessment of Frame Structure using Ant Colony Optimization Technique”, at: XVII National Seminar on Aerospace Structures (NASAS 2011), 22-24 Sep. 2011, Indian Institute of Technology, Kanpur.

Workshops

1. B. Nanda, K.C. Biswal (2015). “Tuned liquid damper for controlling structural vibration: A review”, at: Recent Advances in Structural Engineering (RACE 2015), 7-8 Nov. 2015, Veer Surendra Sai University of Technology, Burla, Odisha.
2. B. Nanda, K.C. Biswal (2014). “Earthquake induced structural vibration control using tuned liquid damper”, at: Recent Advances in Structural Engineering (RACE 2014), 25-26 Oct. 2014, Veer Surendra Sai University of Technology, Burla, Odisha.

1. R. S. Krishna, J. Mishra , S.K. Das , B. Nanda , S.K. Patro, S.M. Mustakim (2022),"A Review on Potential of Graphene Reinforced Geopolymer Composites." K. Mukherjee, R.K. Layek, D. De (eds.), Tailored Functional Materials. Springer, Singapore, pp. 43-60. https://doi.org/10.1007/978-981-19-2572-6_4.
2. L. Mohanty, A. Swain, B. Nanda (2022), "Estimation of parameters in ungauged catchment using Map Correlation Method: A case study on Krishna-Godavari river basin." S. Kanga, S.K. Singh, G. Meraj, M. Farooq (Eds.), Geospatial Modeling for Environmental Management: Case Studies from South Asia (1st ed.) CRC Press. https://doi.org/10.1201/9781003147107-3.
3. J. Mishra, S.K. Das, B. Nanda, S.K. Patro, S.M. Mustakim (2022), "Strength Development in Ferrochrome Ash-Based Geopolymer Concrete." In: S.K. Ghosh, S.K. Ghosh, B.G. Mohapatra, R.L. Mersky (Eds), Circular Economy in the Construction Industry. ISBN: 9781003217619, CRC Press, Boca Raton, Florida, pp. 175-184. https://doi.org/10.1201/9781003217619.
4. S. Upadhyaya, B. Nanda, R.K. Panigrahi (2018). “Experimental analysis of partial replacement of fine aggregate by granite dust in concrete.” In: B. Das, N. Neithalath (Eds), Sustainable Construction and Building Materials. ISBN: 9789811333163, Lecture Notes in Civil Engineering, vol 25. Springer, Singapore, pp. 335-344. https://doi.org/10.1007/978-981-13-3317-0_31.
5. B. Nanda, K.C. Biswal (2015). “A Review on Applications of Tuned Liquid Dampers in Vibration Control.” In: C.R. Mohanty, S.K. Panigrahi (Eds.), Advances in Civil Engineering. ISBN: 9789352356850, Department of Civil Engineering, Veer Surendra Sai University of Technology, Burla, pp. 183-200.
6. B. Nanda, R Anand, DK Maiti (2015). “Frequency Based Inverse Damage Assessment Technique Using Novel Hybrid Neuro-particle Swarm Optimization.” In: L. Jain, H. Behera, J. Mandal, D. Mohapatra, (Eds.), Computational Intelligence in Data Mining - Volume 3. ISBN: 9788132222019, Springer, Germany, pp. 617-626. https://doi.org/10.1007/978-81-322-2202-6_56
7. B. Nanda, T. R. Jebieshia, D.K. Maiti and D. Maity (2014). “Damage Assessment of Composite Structures From Changes in Natural Frequency Using Unified Particle Swarm Optimization.” In: N.R. Iyer, G.S. Palani and T. Kant (Eds.), Proceedings of ICCMS 2014 5th International Congress on Computational Mechanics and Simulation. ISBN: 9789810911393, Research Publishing, Singapore, pp. 944-953. https://doi.org/10.3850/978-981-09-1139-3_231
8. B Nanda, A. Majumdar, D Maity, D.K. Maiti (2014). “Performance comparison among vibration based indicators in damage identification of structures.” In: K.R. Balasubramanian, S.P. Sivapirakasam and R. Anand (Eds.), Dynamics of Machines and Mechanisms, Industrial Research. ISBN: 9783038351634, Trans Tech Publications, Switzerland, pp. 2081-2085.
9. B. Nanda, K.C. Biswal (2011). “Application of tuned liquid damper for controlling structural vibration due to earthquake excitation.” In: S.O. Cheung, S. Yazdani, N. Ghafoori, A. Singh (Eds.), Modern Methods and Advances in Structural Engineering and Construction. ISBN: 9810879202, Research Publishing, Singapore, pp. 983-987.

1. Coordinator, UGC-UKIERI Sponsored workshop on Recent Advances in Strengthening of Concrete Structures (RASCS 2019)”, 9th Mar. 2019. Department of Civil Engineering, Veer Surendra Sai University of Technology, Burla.
2. Coordinator, QIP sponsored one-week short term course on Advanced Materials and Techniques for Reinforced Concrete Structures (AMTRCS 2017), 27 Mar. - 01 Apr. 2017. Department of Civil Engineering, Veer Surendra Sai University of Technology, Burla.
3. Co-convener, International Conference on Recent Advances in mechanics and materials (ICRAMM-2016), 17-18, Dec. 2016. Department of Civil Engineering, Veer Surendra Sai University of Technology, Burla.

1. Assistant Warden (Anuradha Hall of Residence)
2. NSS Project Coordinator
3. Department faculty advisor for Training and Placement
4. Faculty-in-charge for Concrete Lab

Invited Lectures and Technical Presentations:

1. Structural design using STAAD Pro;  in: Advances and Innovations in Civil Engineering, 2017
2. Structural Health Monitoring and Damage Identification using Vibration data and Particle Swarm Optimization; in: Advanced materials and techniques for reinforced concrete structures (AMTRCS), 2017.
3. Damage Assessment of Aircraft Structures from Limited Vibration Data, at Annual ARDB (structures panel) symposium 2012 held at IIT Madras, May 2013.
4. Vibration-Based Structural Damage Detection Technique Using Particle Swarm Optimization with Incremental Swarm Size, at Annual ARDB (structures panel) symposium 2012 held at NAL Bangalore, May 2012.
5. Damage Assessment of Isotropic Beams using Changes in Natural Frequency, at Annual ARDB (structures panel) symposium 2011 held at IIT Madras, May 2011.

Technical Reports Prepared:

1. B. Nanda, D. Maity, D.K. Maity; 2014; DamageAssessment of Aircraft Structures from Limited Vibration Data, submitted to: Aeronautics Research and Development Board, New Delhi,
2. B. Nanda, D. Maity, S. K. Bhattacharyya, B. Adhikari; 2014; Development of Design Methodology for Chemically Treated Bamboo Reinforced Concrete Members for Low Cost Housing, Submitted to: Building Materials and Technology Promotion Council, New Delhi.

Online Lecture Notes Prepared:

1. Estimation and Professional Practice, B. Tech (Civil Engineering) 8th Semester; available at: http://www.vssut.ac.in/lecture_notes/lecture1529931425.pdf.
2. Civil Engineering Materials and Construction; B. Tech (Civil Engineering) 3rd Semester; available at: http://www.vssut.ac.in/lecture_notes/lecture1424085991.pdf. (Joint)
3. Concrete Laboratory Manual, B. Tech (Civil Engineering), 3rd Semester, available at: http://www.vssut.ac.in/lecture_notes/lecture1529931604.pdf

Present Address :  Flat No. T3/3E, Samaleswari Vatika, Hirakud Road, Remed, Sambalpur, 768006 Odisha, India

Permanent Address :  At/Po: Kalaspur, Via: Bhuinpur, Kendrapara, Odisha, Pin: 754239