registrar@vssut.ac.in +91 8480441756

ବୀର ସୁରେନ୍ଦ୍ର ସାଏ ବୈଷୟିକ ବିଶ୍ୱବିଦ୍ୟାଳୟ

वीर सुरेंद्र साई प्रौद्योगिकी विश्वविद्यालय

Veer Surendra Sai University of Technology

All Projects

  1. P.Mishra & Dr. S.K.Acharya, V.Dikshit “Erosive wear behavior of red mud filled metal matrix composite.” International Journal of Reinforced plastics and Composites, Volume 27, No. 2, pp.145-152.
  2. P.Mishra & Dr. S.K.Acharya, S.K.Meher, V.Dikshit “Weathering behavior of bagasse fiber reinforced polymer composite.” International Journal of Reinforced plastics and Composites, Volume 27, No. 16-17, pp.1839-1846.
  3. P.Mishra & Dr. S.K.Acharya, S.K.Mehar. “The influence of fiber treatment on the performance of bagasse fiber reinforced polymer composite.” International Journal of Reinforced plastics and Composites, Volume 28, No. 24, pp.3027-3036.
  4. Dr. S.K.Acharya, P.Mishra, Dr.S.C.Mishra “Effect of environment on the mechanical properties of fly ash – jute – polymer Composite.” Indian Journal of Engineering and Material Science, Volume 15, No. 6, pp. 483-488.
  5. Punyapriya Mishra and S.K.Acharya. “Anisotropy abrasive wear behaviour of bagasse fiber reinforced polymer composite.” International Journal of Engineering, Science and Technology, Volume 2, No. 11, pp. 104-112.
  6. Punyapriya Mishra & S.K.Acharya. “Solid particle erosion of bagasse fiber reinforced epoxy composite.” International Journal of Physical Science, Volume 5, No.2, pp. 109-115
  7. Punyapriya Mishra and S.K.Acharya. “Effect of fiber loading on the abrasive wear behaviour of bagasse fiber reinforced epoxy composite.” Journal of Tribology Research, Volume 1, No. 2, pp. 59-64
  8. Samir Kumar Acharya, Punyapriya Mishra and Suraj Kumar Mehar. “Effect of surface treatment on the mechanical properties of bagasse fiber reinforced polymer composite.” Journal of Bioresources. Volume 6, No. 3, pp. 3155-3165
  9. Punyapriya Mishra and S.K.Acharya. “Study on dielectric properties of bagasse fiber reinforced epoxy composite.” Journal of Inventi. Volume 2, No.1
  10. Punyapriya Mishra, “Statistical analysis for the abrasive wear behavior of bagasse fiber reinforced polymer composite”. International Journal of Applied research in Mechanical Engineering (IJARME) Vol. 2, Issue 3, P. 154-158
  11. Gujjala Raghavendra, S.K.Acharya. C.R.Deo, P.Mishra “Fabrication-modelling and analysis on tribological performance of natural composites using taguchi approach.” Procedia Engineering, Volume 38, p.2635-2644
  12. Punyapriya Mishra, “Mechanical behavior of bagasse fiber reinforced epoxy composites at liquid nitrogen temperature”. Journal of Solid waste Technology and Management, Vol. 40, No.3, Page No.197-202
  13. Punyapriya Mishra & Tanushree Bera. “Fabrication and characterization of composite using carbon black-waste from petroleum products.” International Journal of Advanced Research (IJAR), Volume 2, Issue 7, 122-130
  14. Narasingh Deep, Punyapriya Mishra, Fabrication, Modeling and Analysis of The Erosive Wear Properties of Multi Walled Carbon Nanotube Reinforced PMMA Composite Using Taguchi Approach, Int. J. Recent Sci. Res, 6, 10, 6802-6806
  15. Narasingh Deep, Punyapriya Mishra & Swadhin Kumar Patel, Abrasive wear behavior of graphite reinforced PMMA matrix composites, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) special issue, 329-334
  16. Tanushree Bera, S.K.Acharya, Punyapriya Mishra “Synthesis, mechanical, thermal Properties of carbon black/epoxy composites”, International Journal of Engineering, Science and Technology, 10 (4), 12-20
  17. Narasingh Deep, Punyapriya Mishra, “Evaluation of mechanical properties of functionalized carbon nano tube reinforced PMMA polymer nanocomposite”, Karbala International Journal of Modern Science, 4(2), 207-215
  18. S N Panda, S.Panda, D.S.Khamari, P.Mishra, “Re-examination for effect of ball race conformity on life of Rolling Element bearing using Metaheuristic, International Journal of Advanced Mechanical Engineering, 8 (1) 285-294
  19. Debasmita Pani, Punyapriya Mishra, Tribological behavior of sponge gourd based hybrid reinforced polymer composite, International Journal of Advanced Mechanical Engineering, 8(1), Special edition, 89-96
  20. Narasingh Deep, Punyapriya Mishra “Fabrication and characterization of thermally conductive PMMA/MWCNT nanocomposites”, Materials Today Proceedings, 5(14), 28328-28336
  21. Punyapriya Mishra, Narasingh Deep, Sagarika Pradhan, Vikram G Kamble “Effect of functionalized MWCNT on the mechanical and dielectric properties of PMMA nano composites”, International Journal of Nano Science, 18 (6), 1850035-304
  22. Debasmita Pani, Punyapriya Mishra, Study of mechanical properties of natural fiber reinforced hybrid polymer composites, International journal of Advanced Mechanical Engineering, 9(1), 1-6
  23. Narasingh Deep, Punyapriya Mishra, Layatitdev Das, “Application of adaptive neuro-fuzzy inference system (ANFIS) for predicting dielectric characteristics of CNT/PMMA nanocomposites.” Materials Today: Proceedings, 33, 5200-5205
  24. Swagatika Mishra, Punyapriya Mishra, “ Synthesis and characterization of CCTO0.5 BT0.5/epoxy hybrid ceramic polymer composite for electronic applications” Materials Today: Proceedings, Volume 67, Part 2, Pages 372-376
  25. Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, “Investigation of glass fiber influence on mechanical characteristics of natural fiber reinforced polyester composites: an experimental and numerical approach”, Composites theory and practice, 22: 3, 123-129
  26. Deepak K Mohapatra, Chitta R Deo, Punyapriya Mishra, Kiran K Ekka, Chandrakanta Mishra, “Mechanical characterization of kenaf/glass fibre hybrid composite laminates: An experimental and numerical approach”, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089221136813
  27. Swagatika Mishra, Punyapriya Mishra, Punyatoya Mishra, Dinesh Kumar Mishra, Krushna Prasad Shadangi, Deepak Kumar Mohapatra, Evaluation of dielectric properties of CCTO-BT/epoxy composites for electronic applications. Journal of Harbin Institute of Technology (New Series), 31(1), 69-77
  28. Chandrakanta Mishra, Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Kiran Kumar Ekka, Erosion wear behaviour of kenaf/glass hybrid polymer composites. Journal of Harbin Institute of Technology (New Series), 31 (1), 78-89
  29. Sabindra Kachhap, Pabitra Kumar Sahu, Punyapriya Mishra, Investigation and optimization of wire EDM process parameters for Al 5454 alloy machining, Materials today proceeding
  30. Chetana Tripathy, Deepak Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Erosive wear study of PPLSF/Glass fiber reinforced hybrid laminates, Journal of Harbin Institute of Technology (New Series)
  31. Swagatika Mishra, Punyapriya Mishra, Punyatoya Mishra, Deepak Kumar Mohapatra, Dinesh Kumar Mishra, Krushna Prasad Shadangi, Study of frequency dependence properties of CCTO-BT/epoxy composites, Part C: Journal of Mechanical Engineering Science, 238 (6), 2140-2149
  32. Swagatika Mishra, Punyapriya Mishra, Punyatoya Mishra, Deepak Kumar Mohapatra, Dinesh Kumar Mishra, Krushna Prasad Shadangi, Study of Mechanical and Morphological properties of CCTO-BT/epoxy composite, Composite Theory and Practices, 23(3), 123-128
  33. Ajit Kumar Behera, Punyapriya Mishra, Punyatoya Mishra, Chitta Ranjan Deo, Deepak Kumar Mohapatra, Debasish Rout, Effect of impact velocity and impingement angle on the Erosive wear behaviour of ceramic reinforced polymer composites, Transactions of Indian Institute of Metals, 77(2), 371-378
  34. Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Chandrakanta Mishra, Influence of Load and Sliding Velocity on Abrasive Wear of Polyester Composites Reinforced with Bio-Particulates as Filler Material, Transactions of Indian Institute of Metals, 1, 1-10
  35. Chetana Tripathy, Deepak Kumar Mohapatra, Chitta Ranjan Deo, Padmanav Dash, Punyapriya Mishra, Experimental and numerical evaluation of mechanical performances of hybrid Palmyra-Palm-Leaf-Stalk/Glass fiber reinforced polyester composites, Journal of Elastomers & Plastics, 56(2), 141-168
  36. Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Padmanav Dash, Influence of pistachio shell filler addition and interply hybridization on mechanical and thermal performances of polyester composites, Journal of Elastomers & Plastics, 56(2), 169-193
  37. Itishree Rout, Trupti Ranjan Mahapatra, Punyapriya Mishra, Debadutta Mishra, Free Vibration and Acoustic Responses of Partially Biodegradable Hybrid Composites: Numerical Analysis and Experimental Validation, Journal of Vibration Engineering & Technologies, 1-20
  38. Binita Dash, Trupti R. Mahapatra, Punyapriya Mishra, Debadutta Mishra, Hygrothermal sound radiation analysis of layered composite plate using HFEM-IBEM micromechanical model and experimental validation, Structural Engineering and Mechanics, 89(3), 265-281
  39. Dilip K. Sahu, Priyam P. Tripathy, Trupti R. Mahapatra, Punyapriya Mishra, Debadutta Mishra, Design optimization of structural component (hitch bracket of tractor): A reverse engineering approach, Structural Engineering and Mechanics, 89(5)
  40. Lipsamayee Mishra, Trupti Ranjan Mahapatra, Debadutta Mishra, Punyapriya Mishra, Pratap Chandra Padhi, Study of Nd: YAG laser micro-drilling machinability and parametric optimization of graphite/Epoxy and carbon black/Epoxy nanocomposites, Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanomaterials, Nanoengineering and Nanosystems, 23977914231217921
  41. Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Padmanav Dash, Effect of pistachio shell particles on mechanical and erosion wear performance of hybrid kenaf/glass polyester composites, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 13506501231224686
  42. Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Chandrakanta Mishra, Investigation of Mechanical Attributes and Dynamic Mechanical Analysis of Hybrid Polyester Composites for Automotive Applications, Fibers and Polymers, Pages 1-19
  43. AICTE - MODROB project costing Rs 2.8 lakhs for “Machining Performance Evalution of CVD/PVD Coated Carbide Al2O3 ceramics and CBN/Diamond cutting tool inserts”. (in June 2014).
  44. AICTE - MODROB project costing Rs 7.56 lakhs for “Modernization of Materials Research Laboratory” (2010-2013).
  45. In the capacity of H.O.D. : I was looking after for the purchase and installation of two major equipments (i.e. Instron make UTM of 10 ton capacity and Piezo-electric Force Dynamometer) costing Rs 55 lakhs funded by DST-FIST (from February 2009 to July 2014).
  46. Funding Agency (Scheme) Year : UGC-MRP-2013Title : Development of a high vacuum brazing furnace for joining metals to ceramicsPI/Co-PI : PIDuration(years) : 3.0Amount Sanctioned(In Lakhs) : 14.97Status - completed / ongoing : Completed
  47. Funding Agency (Scheme) Year : CSIR-ERD-2013Title : Development of NCD and UNCD diamond coatings and their characterization on cemented carbide insertsPI/Co-PI : PIDuration(years) : 3.0Amount Sanctioned(In Lakhs) : 21.92Status - completed / ongoing : Completed
  48. Funding Agency (Scheme) Year : AICTE (RPS)-2012Title : Development of nano/ultranano diamond coating on cemented carbide inserts by Hot Filament Chemical Vapor Deposition (HFCVD) methodPI/Co-PI : PIDuration(years) : 2.0Amount Sanctioned(In Lakhs) : 14.10Status - completed / ongoing : Completed
  49. Funding Agency (Scheme) Year : AICTE (MODROB)-2010
    Title : Modernization of  Material Research Laboratory
    PI/Co-PI : Co-PI
    Duration(years) : 1.5
    Amount Sanctioned(In Lakhs) : 7.56
    Status - completed / ongoing : Completed
  50. Funding Agency (Scheme) Year : AICTE (RPS)-2009
    Title : Biasing and Nucleation study by addition of metal powders on growth of diamond by Hot Filament Chemical Vapor Deposition (HFCVD) method on cemented carbide inserts
    PI/Co-PI : PI
    Duration(years) : 3.0
    Amount Sanctioned(In Lakhs) : 6.49
    Status - completed / ongoing : Completed
  51. Funding Agency (Scheme) Year : DST (FIST)-2008Title : Development of Mechanical Engineering LaboratoryPI/Co-PI : Co-PIDuration(years) : 5.0Amount Sanctioned(In Lakhs) : 70.00Status - completed / ongoing : Completed
  52. Funding Agency (Scheme) Year : AICTE (RPS)-2008
    Title : Characterization of Hot Filament Chemical Vapour Deposition (HFCVD) diamond coated carbide inserts
    PI/Co-PI : PI
    Duration(years) : 2.0
    Amount Sanctioned(In Lakhs) : 5.50
    Status - completed / ongoing : Completed
  53. Funding Agency (Scheme) Year : DST (SERC)-2007Title : Design, Development and Fabrication of a CVD set-up for diamond coating on cemented carbide cutting tool inserts for machining non-ferrous materialsPI/Co-PI : PIDuration(years) : 3.0Amount Sanctioned(In Lakhs) : 18.36Status - completed / ongoing : Completed
  54. "Performance enhancement of a slotted fin heat sink: An Experimental and Computational investigation" funded by OSHEC(Odisha State Higher Education Council)
  55. Seed Grant Project from TEQIP III of ₹ 1,00,000/- (2016)
  56. Seed Grant Project from TEQIP III of ₹ 50,000/- (2021)
  57. Computational Investigation of the thermo-mechanical properties of the Investment Casting Process, UGC, MRP (Applied) (05 Lakhs).
  58. Computational analysis of the thermal aspects of metal casting process, Seed grant, TEQIP-II, VSSUT, Burla (01 Lakh).
  60. Research Grant under “Collaborative Research and Innovation Scheme” of TEQIP-III (VSSUT, Burla) with Project Title: Development of light weight fiber reinforced polymer composite for a low cost mobile shelter house order No. VSSUT/TEQIP/162/2021, dated 18-03-2021 with a Grant Sanctioned: INR 50,000/-.
  61. NIL
  62. KIIT University seed grant for Green Engine Development (Rs. 10 Lakhs)
  63. AICTE sponsored research project (Rs. 17.8 lakhs) 20/AICTE/RIFD/RPS43/2012-1
  64. NIL
  65. I Nayak, J Rana and A.Parida., "Performance Optimization in Electro Discharge Machining using a suitable multi-response optimization techinque", Published online on 9th Dec.-2016 in Decision Science Letter (Volume-6-2017,pp 283-294).
  66. B.B. Satapathy ,J.Rana and K.P.Maity,"Numerical prediction of hole profile in laser drilling process and experimental validation",International Journal of Advanced Manufacturing Technology,Published online on 28th Oct.-2016.
  67. I Nayak and J Rana., "Selection of a Suitable Multi-response Optimization Technique for Turning Operation", Decision Science Letter-5, July 2015,pp 129-142.
  68. Mohanty U.K. and Rana J., "Parametric Optimization of EDM process using Weighted signal to noise Ratio". International Journal of Material Sciences and Manufacturing Engineering, April 2015 Vol. 42, Issue- I, pp. 1187-1193.
  69. Satapathy B.B., Rana J., Maity K.P. and Biswal S. "Experimental Study in the process parameters in Laser Percussion Drilling". International Journal of Scientific and Engineering Research Vol. 4, Issue-5, May-2013, pp. 36-39.
  70. Satapathy B.B., Rana J. and Maity K.P., "Quality Optimization of microhole in Laser Drilling" IOSR Journal of Engineering, Mar-2012, Vo. 2(3), pp. 382-388.
  71. Satapathy B.B., Rana J, Maity K.P. and Biswal S., "Optimization of Process Parameter in Laser Percussion Drilling". International Journal of Creative Mathematical Science and Technology. Vol. 17, No.25, 2012, pp. 17-25.
  72. Satapathy B.B., Rana J. and Maity K.P., "Effect of Process Parameters in Laser Drilling", International Journal of Applied Engineering Research, Vol-6, No.18,2011, pp. 2258-2262.
  73. Pradhan P., Rana J and Mishra C., "Effect of hardening on fatigue life of C-40 steel’’ Strength, Fracture and Complexity, Vol. 7, 2011, pp. 273-283.
  74. Rana J. and Pradhan P., "Optimization of Process Parameters for Ductile and Brittle materials in Surface Grinding", Published in the International Journal for Manufacturing Technology and Research, Vol. 5, No. 1-2, Jan-July, 2009, pp. 74-80.
  75. Rana J., Prasad B.V.S.S.S. and Mishra P.K., "Optimization of Process parameters for CO2 Laser transformation hardening", Published in International Journal of Manufacturing Technology and Research, Vol. 4, No. 3-4, July- Dec, 2008, pp. 75-81.
  76. Rana J., Suar S. and Bhoi R.K., "Optimization of Process Parameters in Laser Drilling Using Taguchi Technique", International Journal of Manufacturing Technology and Research, Vol-4, No. 1-2, Jan- June 2008, pp. 77-78.
  77. Rana J., Goswami G.L., Jha S.K., Mishra P.K. and Prasad B. V.S.S.S. "Experimental studies on the microstructure and hardness of laser-treated steel specimens". Journal of Optics and Laser Technology, Vol- 39, 2007, pp 385-393.
  78. Rana J., Prasad B.V.S.S.S and Mishra P.K., "Case Hardening of Laser Treated Steel Specimen Using Energy Integral Method". Journal of Materials Processing and Manufacturing Science, Vol-6, Jan, 1998, pp229-238.
  79. Rana J., Mishra P.K and Prasad B.V.S.S.S., "A Transient Three Dimensional Thermal Model for Laser Heat Treatment of Finite Size Work pieces’’ Journal of Materials Processing and Manufacturing Science, Vol-5, April, 1997, pp 283-293.
  80. S. K. Sarangi, A. Chattopadhyay, A. K. Chattopadhyay Effect of pretreatment methods and chamber pressure on morphology, quality and adhesion of HFCVD diamond coating on cemented carbide inserts Applied Surface Science, Elsevier Science 2.711 254 (2008) 3721 10.1016/j.apsusc.2007.10.104
  81. S. K. Sarangi, A. Chattopadhyay, A. K. Chattopadhyay Effect of pretreatment, seeding and interlayer on nucleation and growth of HFCVD diamond films on cemented carbide tools Int. J. Refractory Metals and Hard Materials, Elsevier Science 1.989 26 (2008) 220 10.1016/j.ijrmhm.2007.05.002
  82. A. Chattopadhyay, S. K. Sarangi, A. K. Chattopadhyay Effect of negative dc substrate bias on morphology and adhesion of diamond coating synthesised on carbide turning tools by modified HFCVD method Applied Surface Science, Elsevier Science 2.711 255 (2008) 1661 10.1016/j.apsusc.2008.04.065
  83. A. K. Chattopadhyay, P. Roy, A. Ghosh, S. K. Sarangi Wettability and machinability study of pure aluminum towards uncoated and coated carbide cutting tool inserts Surface and Coatings Technology, Elsevier Science 2.135 203 (2009) 94110.1016/j.surfcoat.2008.08.047
  84. P. Roy, S. K. Sarangi, A. Ghosh, A.K. Chattopadhyay Machinability study of pure aluminium and Al-12% Silicon alloys against uncoated and coated carbide inserts Int. J. Refractory Metals and Hard Materials, Elsevier Science 1.989 27 (2009) 535 10.1016/j.ijrmhm.2008.04.008
  85. A. K. Chattopadhyay, P. Roy, S. K. Sarangi Study of wettability test of pure aluminum against uncoated and coated carbide inserts Surface and Coatings Technology, Elsevier Science 2.135 204 (2009) 410 10.1016/j.surfcoat.2009.07.038
  86. S. K. Sarangi, A. Chattopadhyay, A.K. Chattopadhyay Influence of process parameters on crystal growth of diamond on cemented carbide substrates by HFCVD system Int. J. Refractory Metals and Hard Materials, Elsevier Science 1.989 31 (2012) 1 10.1016/j.ijrmhm.2011.07.007
  87. P. R. Dash, K. Ray, S. K. Sarangi, P. K. Pradhan Analysis of Static Instability of an Asymmetric, Rotating Sandwich-Beam Advances in Acoustics and Vibration Open Access 2012 (2012) 191042 10.1155/2012/191042
  88. S. K. Pattanik, N. K. Bhoi, S. Padhi, S. K. Sarangi Dry machining of aluminium for proper selection of cutting tool: tool performance and tool wear The International Journal of Advanced Manufacturing Technology, Springer 1.568 98 (2018) 55 10.1007/s00170-017-0307-0
  89. R. Kumar, S. K. Pattnaik, J. K. Minz, S. Padhi, S. K. Sarangi Influence of cutting parameters on cutting forces and surface roughness in dry turning of Al. using PCD and different coated tools Sadhana, Academic of Sciences, Springer 0.592 44 (2019) 186 10.1007/s12046-019-1155-4Sadhana(0123456789().,-volV)F]T(30123456789().,-volV)
  90. S. Padhi, M. Behera, S. K. Pattnaik, S. K. Sarangi Diamond Thin Film Coating on WC Substrate by HFCVD Method using Different Seeding Powders and Its Characterization International Journal of Recent Technology and Engineering SCOPUS 8 Issue-2 (2019) 5175-5180 10.35940/ijrte.B3169.078219
  91. D. K. Sahu, S. K. Sarangi, K. U. Sri Influence of substrate bias on performance of diamond coating on WC cutting inserts for machining of aluminium by HFCVD process International Journal of Materials Engineering Innovation, Inderscience SCOPUS 11 Issue 4 (2020) 293-308 https://dx.doi.org/10.1504/IJMATEI.2020.112096
  92. M. Behera, A. Jena, S. K. Pattnaik, S. Padhi, S. K. Sarangi The effect of transition-metal seeding powder on deposition and growth of diamond synthesized by hot filament chemical vapor deposition processes on cemented carbide substrates and its characterization Materials Chemistry and Physics, Elsevier Science 3.47 SCOPUS 256 (2020) 123638 August 2020 10.1016/j.matchemphys.2020.123638
  93. S. K. Pattnaik, M. Behera, S. Padhi, P. R. Dash, S. K. Sarangi Study of cutting force and tool wear during turning of aluminium with WC, PCD and HFCVD coated MCD tool Manufacturing Review, EDP Sciences 1.44 SCOPUS 7 (2020) 27 August 2020 https://doi.org/10.1051/mfreview/2020026
  94. L. R. Bhandarkar, M. Behera, P. P. Mohanty, S. K. Sarangi Experimental investigation and multi-objective optimization of process parameters during machining of AISI 52100 using high performance coated tools Measurement, Elsevier Science 3.464 SCOPUS 172 (2021) 108842 February 2021 https://doi.org/10.1016/j.measurement.2020.108842
  95. L. R. Bhandarkar, P. P. Mohanty, S. K. Sarangi Experimental study and multi-objective optimization of process parameters during turning of 100Cr6 using C-type advanced coated tools Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 1.762 SCOPUS 235 (2021) 7634-7654 10.1177/09544062211043144 journals.sagepub.com/home/pic
  96. A. Jena, S. K. Pattnaik, B. B. Palei, S. K. Sarangi Synthesis of diamond crystal growth on tungsten carbide inserts by HFCVD using various seeding powders Applied Physics A, Springer 2.584 SCI 128 (2022) 287 10.1007/s00339-022-05417-z
  97. A. Jena, B. B. Palei S. K. Pattnaik, S. K. Sarangi, AFM, Nano-indentation and TEM characterization study of HFCVD diamond on Tantalum and Diamond seeded cemented carbide inserts, Int. J. Refractory Metals and Hard Materials, Elsevier Science, 3.6 SCI 118 (2024) 106503, 10.1016/j.ijrmhm.2023.106503
  98. A. Jena, S. K. Pattnaik, S. K. Sarangi, The performance of advanced cutting tools used for dry machining of aluminium, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Springer, 2.2 SCIE, 46 (2024) 441, 10.1007/s40430-024-05025-3
  99. Mohanty A, Dash S K, Roy S, Natural convection cooling of an infrared suppression (IRS) device with cylindrical funnels, International journal of thermal sciences, Volume 141, July 2019, Pages 103-113,doi:https://doi.org/10.1016/j.ijthermalsci.2019.03.032
  100. Ghoshdastidar P S, Kabelac S and Mohanty A, Numerical modeling of atmospheric pool boiling by the coupled map lattice method, Journal of Mechanical Engineering Science, Part C, Feb 2004, Pages195-05,doi:https://doi.org/10.1243/095440604322886946
  101. Aurovinda mohanty, Santosh Kumar Senapti and Sukanta K. Dash, “Natural convection cooling of an Infrared suppression device (IRS) with conical funnels- a computational approach”, International Communications in Heat and Mass Transfer, Volume 118, 2020, Pages: 1-13. https://doi.org/10.1016/j.icheatmasstransfer.2020.104891
  102. Ajay Gupta, Gautam, Satyabrata Sahoo, Aurovinda Mohanty, “ Perforamance evaluation of porous fin with prescribed tip temperature: An analytical and numerical approach”, International Journal of Heat and Mass Transfer, Volume 156, 2020 Pages: 1-16. https://doi.org/10.1016/j.ijheatmasstransfer.2020.119736
  103. Ashok K. Barik, Arouvinda Mohanty, Jnana R. Senapati, Mohamed M. Awad, “Constructural design of different ribs for thermos-fluid performance enhancement of a solar air heater (SAH)”, International Journal of Thermal Science, Volume 160, 2020, Pages: 1-14. https://doi.org/10.2514/1.T6411
  104. Vikrant Chandrakar, Jnana Ranjan Senapati & Aurovinda Mohanty, “Conjugate heat transfer due to conduction, natural convection, and radiation from a vertical hollow cylinder with finite thickness, Numerical Heat Transfer, Part A: Applications, 2020,Pages: 1-25. https://doi.org/10.1080/10407782.2020.1847524
  105. Vikrant Chandrakar, Arnab Mukherjee, Jnana Ranjan Senapati and Aurovinda Mohanty, “Conjugate free convection with surface radiation from real-scale IRS system with multiple conical funnels: A numerical analysis”, International Communications in Heat and Mass Transfer, Volume 134, 2022. https://doi.org/10.1016/j.icheatmasstransfer.2022.106004
  106. Rahul Ray, Aurovinda Mohanty*, Pandab Patro and Kartik Tripathy, “Performance enhancement of heat sink with branched and interrupted fins”, International Communications in Heat and Mass Transfer, Volume 133,2022, Pages: 1-11. https://doi.org/10.1016/j.icheatmasstransfer.2022.105945
  107. Vikrant Chandrakar, Arnab Mukherjee, Jnana Ranjan Senapati and Aurovinda Mohanty, “Entropy Generation Study of Turbine Exhaust Gas Through an Infrared Suppression Device”, Journal of Thermophysics and Heat Transfer, 2021, Pages: 1-12. https://doi.org/10.2514/1.T6411
  108. Aurovinda Mohanty, Santosh Kumar Senapati and Manoj Kumar Dash, “Cooling Characteristic of an Infrared Suppression Device with Single Perforated Funnel: A Computational Fluid Dynamics Approach”, Journal of Thermal Science and Engineering Applications; 2023, Volume 15, issue1, Pages: 1-10.DOI: https://doi.org/10.1115/1.4055263.
  109. Rahul Ray, Aurovinda Mohanty*, Pandab Patro, Santosh Kumar Senapati"Performance improvement of a heat sink with triangular slotted and interrupted fins: A computational study",Applied Thermal Engineering,Volume 230, Part B, 2023,DOI:https://doi.org/10.1016/j.applthermaleng.2023.120783
  110. Mohanty, Aurovinda, Santosh Kumar Senapati, Viplove Ranjan Ganguly, and Manoj Kumar Dash. “Computation of Natural Convection Heat Transfer from an Infrared Suppression Device (IRS) with Multiple Louvered Cylindrical Funnels.” Numerical Heat Transfer, Part A: Applications, (2024), 1–17. doi:10.1080/10407782.2024.2328763.
  111. Manoj Kumar Dash, Santosh Kumar Senapati and Aurovinda Mohanty,"Natural Convection Around Three Horizontal Cylinders in Vertical Array: A Numerical Approach", Journal of Thermophysics and Heat Transfer,https://doi.org/10.2514/1.T6925
  112. P.Mishra & Dr. S.K.Acharya, V.Dikshit “Erosive wear behavior of red mud filled metal matrix composite.” International Journal of Reinforced plastics and Composites, Volume 27, No. 2, pp.145-152.
  113. P.Mishra & Dr. S.K.Acharya, S.K.Meher, V.Dikshit “Weathering behavior of bagasse fiber reinforced polymer composite.” International Journal of Reinforced plastics and Composites, Volume 27, No. 16-17, pp.1839-1846.
  114. P.Mishra & Dr. S.K.Acharya, S.K.Mehar. “The influence of fiber treatment on the performance of bagasse fiber reinforced polymer composite.” International Journal of Reinforced plastics and Composites, Volume 28, No. 24, pp.3027-3036.
  115. Dr. S.K.Acharya, P.Mishra, Dr.S.C.Mishra “Effect of environment on the mechanical properties of fly ash – jute – polymer Composite.” Indian Journal of Engineering and Material Science, Volume 15, No. 6, pp. 483-488.
  116. Punyapriya Mishra and S.K.Acharya. “Anisotropy abrasive wear behaviour of bagasse fiber reinforced polymer composite.” International Journal of Engineering, Science and Technology, Volume 2, No. 11, pp. 104-112.
  117. Punyapriya Mishra & S.K.Acharya. “Solid particle erosion of bagasse fiber reinforced epoxy composite.” International Journal of Physical Science, Volume 5, No.2, pp. 109-115
  118. Punyapriya Mishra and S.K.Acharya. “Effect of fiber loading on the abrasive wear behaviour of bagasse fiber reinforced epoxy composite.” Journal of Tribology Research, Volume 1, No. 2, pp. 59-64
  119. Samir Kumar Acharya, Punyapriya Mishra and Suraj Kumar Mehar. “Effect of surface treatment on the mechanical properties of bagasse fiber reinforced polymer composite.” Journal of Bioresources. Volume 6, No. 3, pp. 3155-3165
  120. Punyapriya Mishra and S.K.Acharya. “Study on dielectric properties of bagasse fiber reinforced epoxy composite.” Journal of Inventi. Volume 2, No.1
  121. Punyapriya Mishra, “Statistical analysis for the abrasive wear behavior of bagasse fiber reinforced polymer composite”. International Journal of Applied research in Mechanical Engineering (IJARME) Vol. 2, Issue 3, P. 154-158
  122. Gujjala Raghavendra, S.K.Acharya. C.R.Deo, P.Mishra “Fabrication-modelling and analysis on tribological performance of natural composites using taguchi approach.” Procedia Engineering, Volume 38, p.2635-2644
  123. Punyapriya Mishra, “Mechanical behavior of bagasse fiber reinforced epoxy composites at liquid nitrogen temperature”. Journal of Solid waste Technology and Management, Vol. 40, No.3, Page No.197-202
  124. Punyapriya Mishra & Tanushree Bera. “Fabrication and characterization of composite using carbon black-waste from petroleum products.” International Journal of Advanced Research (IJAR), Volume 2, Issue 7, 122-130
  125. Narasingh Deep, Punyapriya Mishra, Fabrication, Modeling and Analysis of The Erosive Wear Properties of Multi Walled Carbon Nanotube Reinforced PMMA Composite Using Taguchi Approach, Int. J. Recent Sci. Res, 6, 10, 6802-6806
  126. Narasingh Deep, Punyapriya Mishra & Swadhin Kumar Patel, Abrasive wear behavior of graphite reinforced PMMA matrix composites, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) special issue, 329-334
  127. Tanushree Bera, S.K.Acharya, Punyapriya Mishra “Synthesis, mechanical, thermal Properties of carbon black/epoxy composites”, International Journal of Engineering, Science and Technology, 10 (4), 12-20
  128. Narasingh Deep, Punyapriya Mishra, “Evaluation of mechanical properties of functionalized carbon nano tube reinforced PMMA polymer nanocomposite”, Karbala International Journal of Modern Science, 4(2), 207-215
  129. S N Panda, S.Panda, D.S.Khamari, P.Mishra, “Re-examination for effect of ball race conformity on life of Rolling Element bearing using Metaheuristic, International Journal of Advanced Mechanical Engineering, 8 (1) 285-294
  130. Debasmita Pani, Punyapriya Mishra, Tribological behavior of sponge gourd based hybrid reinforced polymer composite, International Journal of Advanced Mechanical Engineering, 8(1), Special edition, 89-96
  131. Narasingh Deep, Punyapriya Mishra “Fabrication and characterization of thermally conductive PMMA/MWCNT nanocomposites”, Materials Today Proceedings, 5(14), 28328-28336
  132. Punyapriya Mishra, Narasingh Deep, Sagarika Pradhan, Vikram G Kamble “Effect of functionalized MWCNT on the mechanical and dielectric properties of PMMA nano composites”, International Journal of Nano Science, 18 (6), 1850035-304
  133. Debasmita Pani, Punyapriya Mishra, Study of mechanical properties of natural fiber reinforced hybrid polymer composites, International journal of Advanced Mechanical Engineering, 9(1), 1-6
  134. Narasingh Deep, Punyapriya Mishra, Layatitdev Das, “Application of adaptive neuro-fuzzy inference system (ANFIS) for predicting dielectric characteristics of CNT/PMMA nanocomposites.” Materials Today: Proceedings, 33, 5200-5205
  135. Swagatika Mishra, Punyapriya Mishra, “ Synthesis and characterization of CCTO0.5 BT0.5/epoxy hybrid ceramic polymer composite for electronic applications” Materials Today: Proceedings, Volume 67, Part 2, Pages 372-376
  136. Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, “Investigation of glass fiber influence on mechanical characteristics of natural fiber reinforced polyester composites: an experimental and numerical approach”, Composites theory and practice, 22: 3, 123-129
  137. Deepak K Mohapatra, Chitta R Deo, Punyapriya Mishra, Kiran K Ekka, Chandrakanta Mishra, “Mechanical characterization of kenaf/glass fibre hybrid composite laminates: An experimental and numerical approach”, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089221136813
  138. Swagatika Mishra, Punyapriya Mishra, Punyatoya Mishra, Dinesh Kumar Mishra, Krushna Prasad Shadangi, Deepak Kumar Mohapatra, Evaluation of dielectric properties of CCTO-BT/epoxy composites for electronic applications. Journal of Harbin Institute of Technology (New Series), 31(1), 69-77
  139. Chandrakanta Mishra, Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Kiran Kumar Ekka, Erosion wear behaviour of kenaf/glass hybrid polymer composites. Journal of Harbin Institute of Technology (New Series), 31 (1), 78-89
  140. Sabindra Kachhap, Pabitra Kumar Sahu, Punyapriya Mishra, Investigation and optimization of wire EDM process parameters for Al 5454 alloy machining, Materials today proceeding
  141. Chetana Tripathy, Deepak Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Erosive wear study of PPLSF/Glass fiber reinforced hybrid laminates, Journal of Harbin Institute of Technology (New Series)
  142. Swagatika Mishra, Punyapriya Mishra, Punyatoya Mishra, Deepak Kumar Mohapatra, Dinesh Kumar Mishra, Krushna Prasad Shadangi, Study of frequency dependence properties of CCTO-BT/epoxy composites, Part C: Journal of Mechanical Engineering Science, 238 (6), 2140-2149
  143. Swagatika Mishra, Punyapriya Mishra, Punyatoya Mishra, Deepak Kumar Mohapatra, Dinesh Kumar Mishra, Krushna Prasad Shadangi, Study of Mechanical and Morphological properties of CCTO-BT/epoxy composite, Composite Theory and Practices, 23(3), 123-128
  144. Ajit Kumar Behera, Punyapriya Mishra, Punyatoya Mishra, Chitta Ranjan Deo, Deepak Kumar Mohapatra, Debasish Rout, Effect of impact velocity and impingement angle on the Erosive wear behaviour of ceramic reinforced polymer composites, Transactions of Indian Institute of Metals, 77(2), 371-378
  145. Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Chandrakanta Mishra, Influence of Load and Sliding Velocity on Abrasive Wear of Polyester Composites Reinforced with Bio-Particulates as Filler Material, Transactions of Indian Institute of Metals, 1, 1-10
  146. Chetana Tripathy, Deepak Kumar Mohapatra, Chitta Ranjan Deo, Padmanav Dash, Punyapriya Mishra, Experimental and numerical evaluation of mechanical performances of hybrid Palmyra-Palm-Leaf-Stalk/Glass fiber reinforced polyester composites, Journal of Elastomers & Plastics, 56(2), 141-168
  147. Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Padmanav Dash, Influence of pistachio shell filler addition and interply hybridization on mechanical and thermal performances of polyester composites, Journal of Elastomers & Plastics, 56(2), 169-193
  148. Itishree Rout, Trupti Ranjan Mahapatra, Punyapriya Mishra, Debadutta Mishra, Free Vibration and Acoustic Responses of Partially Biodegradable Hybrid Composites: Numerical Analysis and Experimental Validation, Journal of Vibration Engineering & Technologies, 1-20
  149. Binita Dash, Trupti R. Mahapatra, Punyapriya Mishra, Debadutta Mishra, Hygrothermal sound radiation analysis of layered composite plate using HFEM-IBEM micromechanical model and experimental validation, Structural Engineering and Mechanics, 89(3), 265-281
  150. Dilip K. Sahu, Priyam P. Tripathy, Trupti R. Mahapatra, Punyapriya Mishra, Debadutta Mishra, Design optimization of structural component (hitch bracket of tractor): A reverse engineering approach, Structural Engineering and Mechanics, 89(5)
  151. Lipsamayee Mishra, Trupti Ranjan Mahapatra, Debadutta Mishra, Punyapriya Mishra, Pratap Chandra Padhi, Study of Nd: YAG laser micro-drilling machinability and parametric optimization of graphite/Epoxy and carbon black/Epoxy nanocomposites, Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanomaterials, Nanoengineering and Nanosystems, 23977914231217921
  152. Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Padmanav Dash, Effect of pistachio shell particles on mechanical and erosion wear performance of hybrid kenaf/glass polyester composites, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 13506501231224686
  153. Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Chandrakanta Mishra, Investigation of Mechanical Attributes and Dynamic Mechanical Analysis of Hybrid Polyester Composites for Automotive Applications, Fibers and Polymers, Pages 1-19
  155. Investigation of shock structure upon bubble cloud collapse.
  156. Development of numerical algorithm for two−fluid two−phase flows with phase change for bubble cloud collapse due to shock wave propagation in water.
  157. Project title: Bubble cloud collapse due to shock wave propagation.
  158. Research Project: Department of Aerospace Engineering, KAIST, Republic of Korea (06/2008-06/2010).