registrar@vssut.ac.in +91 8480441756

ବୀର ସୁରେନ୍ଦ୍ର ସାଏ ବୈଷୟିକ ବିଶ୍ୱବିଦ୍ୟାଳୟ

वीर सुरेंद्र साई प्रौद्योगिकी विश्वविद्यालय

Veer Surendra Sai University of Technology

All Publications

International Publications

    2025
  1. Alam J , Panda S*, Nanda P, Dash P, Bibliometric insights into spur gear wear: Trends, detection techniques and sustainable design,Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, https://doi.org/10.1177/09544070251358126
  2. Rath D, Panda S*, Grey relational analysis during sustainable machining of D3 tool steel, International Journal on Interactive Design and Manufacturing (IJIDeM), 1-16, https://doi.org/10.1007/s12008-025-02419-y
    3. 2024
  3. Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Chandrakanta Mishra, Investigation of Mechanical Attributes and Dynamic Mechanical Analysis of Hybrid Polyester Composites for Automotive Applications, Fibers and Polymers, Pages 1-19
  4. Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Chandrakanta Mishra, Investigation of Mechanical Attributes and Dynamic Mechanical Analysis of Hybrid Polyester Composites for Automotive Applications, Fibers and Polymers, Pages 1-19
  5. Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Padmanav Dash, Effect of pistachio shell particles on mechanical and erosion wear performance of hybrid kenaf/glass polyester composites, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 13506501231224686
  6. Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Padmanav Dash, Effect of pistachio shell particles on mechanical and erosion wear performance of hybrid kenaf/glass polyester composites, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 13506501231224686
  7. Lipsamayee Mishra, Trupti Ranjan Mahapatra, Debadutta Mishra, Punyapriya Mishra, Pratap Chandra Padhi, Study of Nd: YAG laser micro-drilling machinability and parametric optimization of graphite/Epoxy and carbon black/Epoxy nanocomposites, Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanomaterials, Nanoengineering and Nanosystems, 23977914231217921
  8. Lipsamayee Mishra, Trupti Ranjan Mahapatra, Debadutta Mishra, Punyapriya Mishra, Pratap Chandra Padhi, Study of Nd: YAG laser micro-drilling machinability and parametric optimization of graphite/Epoxy and carbon black/Epoxy nanocomposites, Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanomaterials, Nanoengineering and Nanosystems, 23977914231217921
  9. Dilip K. Sahu, Priyam P. Tripathy, Trupti R. Mahapatra, Punyapriya Mishra, Debadutta Mishra, Design optimization of structural component (hitch bracket of tractor): A reverse engineering approach, Structural Engineering and Mechanics, 89(5)
  10. Dilip K. Sahu, Priyam P. Tripathy, Trupti R. Mahapatra, Punyapriya Mishra, Debadutta Mishra, Design optimization of structural component (hitch bracket of tractor): A reverse engineering approach, Structural Engineering and Mechanics, 89(5)
  11. Binita Dash, Trupti R. Mahapatra, Punyapriya Mishra, Debadutta Mishra, Hygrothermal sound radiation analysis of layered composite plate using HFEM-IBEM micromechanical model and experimental validation, Structural Engineering and Mechanics, 89(3), 265-281
  12. Binita Dash, Trupti R. Mahapatra, Punyapriya Mishra, Debadutta Mishra, Hygrothermal sound radiation analysis of layered composite plate using HFEM-IBEM micromechanical model and experimental validation, Structural Engineering and Mechanics, 89(3), 265-281
  13. Itishree Rout, Trupti Ranjan Mahapatra, Punyapriya Mishra, Debadutta Mishra, Free Vibration and Acoustic Responses of Partially Biodegradable Hybrid Composites: Numerical Analysis and Experimental Validation, Journal of Vibration Engineering & Technologies, 1-20
  14. Itishree Rout, Trupti Ranjan Mahapatra, Punyapriya Mishra, Debadutta Mishra, Free Vibration and Acoustic Responses of Partially Biodegradable Hybrid Composites: Numerical Analysis and Experimental Validation, Journal of Vibration Engineering & Technologies, 1-20
  15. Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Padmanav Dash, Influence of pistachio shell filler addition and interply hybridization on mechanical and thermal performances of polyester composites, Journal of Elastomers & Plastics, 56(2), 169-193
  16. Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Padmanav Dash, Influence of pistachio shell filler addition and interply hybridization on mechanical and thermal performances of polyester composites, Journal of Elastomers & Plastics, 56(2), 169-193
  17. J Alam, S Panda Exploring Tribological Behaviors of Profile-Shifted Spur Gears: An Experimental Investigation,2024, https://doi.org/10.1080/10402004.2024.2369185
  18. Chetana Tripathy, Deepak Kumar Mohapatra, Chitta Ranjan Deo, Padmanav Dash, Punyapriya Mishra, Experimental and numerical evaluation of mechanical performances of hybrid Palmyra-Palm-Leaf-Stalk/Glass fiber reinforced polyester composites, Journal of Elastomers & Plastics, 56(2), 141-168
  19. Chetana Tripathy, Deepak Kumar Mohapatra, Chitta Ranjan Deo, Padmanav Dash, Punyapriya Mishra, Experimental and numerical evaluation of mechanical performances of hybrid Palmyra-Palm-Leaf-Stalk/Glass fiber reinforced polyester composites, Journal of Elastomers & Plastics, 56(2), 141-168
  20. Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Chandrakanta Mishra, Influence of Load and Sliding Velocity on Abrasive Wear of Polyester Composites Reinforced with Bio-Particulates as Filler Material, Transactions of Indian Institute of Metals, 1, 1-10
  21. Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Chandrakanta Mishra, Influence of Load and Sliding Velocity on Abrasive Wear of Polyester Composites Reinforced with Bio-Particulates as Filler Material, Transactions of Indian Institute of Metals, 1, 1-10
  22. Ajit Kumar Behera, Punyapriya Mishra, Punyatoya Mishra, Chitta Ranjan Deo, Deepak Kumar Mohapatra, Debasish Rout, Effect of impact velocity and impingement angle on the Erosive wear behaviour of ceramic reinforced polymer composites, Transactions of Indian Institute of Metals, 77(2), 371-378
  23. Ajit Kumar Behera, Punyapriya Mishra, Punyatoya Mishra, Chitta Ranjan Deo, Deepak Kumar Mohapatra, Debasish Rout, Effect of impact velocity and impingement angle on the Erosive wear behaviour of ceramic reinforced polymer composites, Transactions of Indian Institute of Metals, 77(2), 371-378
  24. Swagatika Mishra, Punyapriya Mishra, Punyatoya Mishra, Deepak Kumar Mohapatra, Dinesh Kumar Mishra, Krushna Prasad Shadangi, Study of frequency dependence properties of CCTO-BT/epoxy composites, Part C: Journal of Mechanical Engineering Science, 238 (6), 2140-2149
  25. S. Sahoo, P. Patro and H. Barik, Thermal and hydrodynamic analysis of nanofluid flow in a circular pipe using euler-granular mixture model, Multiphase Science and Technology 36 (3), 79-99, (2024).
  26. Swagatika Mishra, Punyapriya Mishra, Punyatoya Mishra, Deepak Kumar Mohapatra, Dinesh Kumar Mishra, Krushna Prasad Shadangi, Study of frequency dependence properties of CCTO-BT/epoxy composites, Part C: Journal of Mechanical Engineering Science, 238 (6), 2140-2149
  27. Chetana Tripathy, Deepak Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Erosive wear study of PPLSF/Glass fiber reinforced hybrid laminates, Journal of Harbin Institute of Technology (New Series)
  28. Chetana Tripathy, Deepak Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Erosive wear study of PPLSF/Glass fiber reinforced hybrid laminates, Journal of Harbin Institute of Technology (New Series)
  29. D. K. Sethy and P. Patro, Parametric study and development of a correlation for Nusselt number in Nanofluid jet impingement, Multiphase Science and Technology, 36(3), 1-18 (2024).
  30. Chandrakanta Mishra, Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Kiran Kumar Ekka, Erosion wear behaviour of kenaf/glass hybrid polymer composites. Journal of Harbin Institute of Technology (New Series), 31 (1), 78-89
  31. Chandrakanta Mishra, Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, Kiran Kumar Ekka, Erosion wear behaviour of kenaf/glass hybrid polymer composites. Journal of Harbin Institute of Technology (New Series), 31 (1), 78-89
  32. Swagatika Mishra, Punyapriya Mishra, Punyatoya Mishra, Dinesh Kumar Mishra, Krushna Prasad Shadangi, Deepak Kumar Mohapatra, Evaluation of dielectric properties of CCTO-BT/epoxy composites for electronic applications. Journal of Harbin Institute of Technology (New Series), 31(1), 69-77
  33. Swagatika Mishra, Punyapriya Mishra, Punyatoya Mishra, Dinesh Kumar Mishra, Krushna Prasad Shadangi, Deepak Kumar Mohapatra, Evaluation of dielectric properties of CCTO-BT/epoxy composites for electronic applications. Journal of Harbin Institute of Technology (New Series), 31(1), 69-77
    34. 2023
  34. J Alam, S Panda A comprehensive study on multi-objective design optimization of spur gear,Mechanics Based Design of Structures and Machines 51 (9), 5272-5298
  35. S. Sahoo, H. Barik and P. Patro, Heat Transfer Study of Water and Air Based Nanofluids with Al2O3 Nanoparticle in a Circular Pipe Using Multiphase Approach, Particulate Science and Technology, 42(3), 393-407 (2023).
  36. R. Ray, A Mohanty, P. Patro and S. K. Senapati, Performance improvement of a heat sink with triangular slotted and interrupted fins: A Computational study, Applied Thermal Engineering, 230, 120783 (2023).
  37. Swagatika Mishra, Punyapriya Mishra, Punyatoya Mishra, Deepak Kumar Mohapatra, Dinesh Kumar Mishra, Krushna Prasad Shadangi, Study of Mechanical and Morphological properties of CCTO-BT/epoxy composite, Composite Theory and Practices, 23(3), 123-128
  38. Swagatika Mishra, Punyapriya Mishra, Punyatoya Mishra, Deepak Kumar Mohapatra, Dinesh Kumar Mishra, Krushna Prasad Shadangi, Study of Mechanical and Morphological properties of CCTO-BT/epoxy composite, Composite Theory and Practices, 23(3), 123-128
  39. Sabindra Kachhap, Pabitra Kumar Sahu, Punyapriya Mishra, Investigation and optimization of wire EDM process parameters for Al 5454 alloy machining, Materials today proceeding
  40. Sabindra Kachhap, Pabitra Kumar Sahu, Punyapriya Mishra, Investigation and optimization of wire EDM process parameters for Al 5454 alloy machining, Materials today proceeding
    41. 2022
  41. A comparative study of meta-heuristics for local path planning of a mobile robot
  42. Analysis and prediction of tool wear in dry turning of hardened D3 steel using hybrid insert: A novel wear map approach
  43. Performance Analysis of Hybrid Ceramic Insert in Dry Turning of Hardened Tool Steel
  44. Sarojrani Pattnaik, Mihir Kumar Sutar(2022). Investigation on the influence of polyethylene wax powder on the characteristics of ceramic shells used for investment casting. Silicon, vol. 14(11), pp. 6089-6096.https://doi.org/10.1007/s12633-021-01386-9. SCIE, IF - 2.8.
  45. D. K. Sethy and P. Patro, Single-phase modeling of nanofluid jet impingement heat transfer, International Journal of Fluid Mechanics Research, 49(6), 47–61 (2022).
  46. R. Ray, A Mohanty, P. Patro and K. Tripathy, Performance enhancement of heat sink with branched and interrupted fins, International Communications in Heat and Mass Transfer, 133, 105945 (2022) .
  47. Deepak K Mohapatra, Chitta R Deo, Punyapriya Mishra, Kiran K Ekka, Chandrakanta Mishra, “Mechanical characterization of kenaf/glass fibre hybrid composite laminates: An experimental and numerical approach”, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089221136813
  48. A. Khuntia. P. Patro and S. Ghosal, Thermal performance analysis of a synthetic jet actuator with moving boundary condition, Journal of Enhanced Heat Transfer, 28(3), 1–18 (2022).
  49. Deepak K Mohapatra, Chitta R Deo, Punyapriya Mishra, Kiran K Ekka, Chandrakanta Mishra, “Mechanical characterization of kenaf/glass fibre hybrid composite laminates: An experimental and numerical approach”, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 09544089221136813
  50. Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, “Investigation of glass fiber influence on mechanical characteristics of natural fiber reinforced polyester composites: an experimental and numerical approach”, Composites theory and practice, 22: 3, 123-129
  51. Deepak Kumar Mohapatra, Chitta Ranjan Deo, Punyapriya Mishra, “Investigation of glass fiber influence on mechanical characteristics of natural fiber reinforced polyester composites: an experimental and numerical approach”, Composites theory and practice, 22: 3, 123-129
  52. Swagatika Mishra, Punyapriya Mishra, “ Synthesis and characterization of CCTO0.5 BT0.5/epoxy hybrid ceramic polymer composite for electronic applications” Materials Today: Proceedings, Volume 67, Part 2, Pages 372-376
  53. Swagatika Mishra, Punyapriya Mishra, “ Synthesis and characterization of CCTO0.5 BT0.5/epoxy hybrid ceramic polymer composite for electronic applications” Materials Today: Proceedings, Volume 67, Part 2, Pages 372-376
  54. Rout, L. N., Mishra, D., & Swain, P. T. R., (2022). “Influence of Silicon Carbide (SiC) Reinforcement on Sliding and Erosive Wear Characteristics of Glass Fiber/Epoxy Hybrid Composites”, Transactions of the Indian Institute of Metals, pp. 1-9, 2022, doi: https://doi.org/10.1007/s12666-022-02828-7
  55. Purohit, A., Tripathy, V., Mishra, S. K., Swain, P. T. R., & Patnaik, P. K., “Mechanical and Tribo-performance Analysis of Linz Donawitz Sludge-Filled Glass–Epoxy Composites using Taguchi Experimental Design”, Journal of The Institution of Engineers (India): Series E, vol. 103, no. 2, pp. 245-251, 2022, doi: https://doi.org/10.1007/s40034-021-00236-y
  56. Patnaik, P. K., Mishra, S. K., Swain, P. T. R., Purohit, A., Parija, S. K., & Panda, S. S., “Multi-objective optimization and experimental analysis of electro-discharge machining parameters via Gray-Taguchi, TOPSIS-Taguchi and PSI-Taguchi methods”, Materials Today: Proceedings, vol. 62, pp. 6189-6198, 2022, doi: https://doi.org/10.1016/j.matpr.2022.05.087
  57. A multi‐objective approach for local path planning of autonomous mobile robot based on metaheuristics
  58. A comprehensive review on design and analysisof spur gears
    59. 2021
  59. Optimum design of 3R manipulator using hybrid PSOGSA algorithm
  60. A comprehensive study on multi-objective design optimization of spur gear
  61. P. Patro, Dilute phase pneumatic conveying in a horizontal pipe: Effect of restitution coefficient and specularity coefficient, International Journal of Fluid Mechanics Research, 48 (1), 63-74 (2021).
    62. 2020
  62. An approach for design optimization of 3R manipulator using Adaptive Cuckoo Search algorithm
  63. Particle Swarm Optimization and Machinability Aspects during Turning of Hardened D3 Steel
  64. A. Barik, S. Rout and P. Patro, Evolution of designs for constructal cooling of a square plate using water, ionic liquid (ILs) and nano-enhanced ionic liquids (NEILs), ASME Journal of Thermal Science and Engineering Applications, 12, 021020 1-10 (2020).
  65. Narasingh Deep, Punyapriya Mishra, Layatitdev Das, “Application of adaptive neuro-fuzzy inference system (ANFIS) for predicting dielectric characteristics of CNT/PMMA nanocomposites.” Materials Today: Proceedings, 33, 5200-5205
  66. P. Patro and S. Garnayak, Heat transfer enhancement from a heated plate with convex dimples by forced convection along with a cross flow jet impingement, International Journal of Applied Mechanics and Engineering, 25 (1), 127-141 (2020).
  67. Narasingh Deep, Punyapriya Mishra, Layatitdev Das, “Application of adaptive neuro-fuzzy inference system (ANFIS) for predicting dielectric characteristics of CNT/PMMA nanocomposites.” Materials Today: Proceedings, 33, 5200-5205
  68. Patnaik, P. K., Mishra, S. K., Swain, P. T. R., & Panda, D., “Effect of Groundnut Shell Particulate Content on Physical and Mechanical Behavior of Jute–Epoxy Hybrid Composite”, Journal of The Institution of Engineers (India): Series E, pp. 1-8, 2020, doi: 10.1007/s40034-020-00185-y
  69. Patnaik, P. K., Swain, P. T. R., Purohit, A., & Biswas, S., “Tribological study on slurry abrasive wear behavior of nonwoven viscose fabric composites with doe approach”, Surface Review and Letters, vol. 27, no. 08, pp. 1950185, 2020, doi: https://doi.org/10.1142/S0218625X19501853
  70. Patnaik, P. K., Mishra, S. K., & Swain, P. T. R., “Erosion wear behavior of needle-punched nonwoven fabric (NPNF) reinforced epoxy composites–An evaluation using Taguchi’s design”, Materials Today: Proceedings, vol. 33, pp. 5683-5686, 2020, doi: https://doi.org/10.1016/j.matpr.2020.04.208
  71. Patnaik, P. K., Swain, P. T. R., Mishra, S. K., Purohit, A., & Biswas, S., “Composite material selection for structural applications based on AHP-MOORA approach”, Materials Today: Proceedings, vol. 33, pp. 5659-5663, 2020, doi: https://doi.org/10.1016/j.matpr.2020.04.063
  72. Purohit, A., Satapathy, A., Swain, P. T. R., & Patnaik, P. K., “Analysis of sliding wear behavior of LD sludge filled epoxy composites using response surface methodology”, Materials Today: Proceedings, vol. 33, pp. 5066-5069, 2020, doi: https://doi.org/10.1016/j.matpr.2020.02.845
  73. Purohit, A., Swain, P. T. R., & Patnaik, P. K., “Mechanical and sliding wear characterization of LD sludge filled hybrid composites”, Materials today: proceedings, vol. 26, pp. 1654-1659, 2020, doi: https://doi.org/10.1016/j.matpr.2020.02.345
  74. Laser micro drilling of 316L stainless steel orthopedic implant: A study
  75. Purohit, A., Satapathy, A., & Swain, P. T. R., “Analysis of Erosion Wear Behavior of LD Sludge Filled Polypropylene Composites Using RSM”, Materials Science Forum, vol. 978, pp. 222-228, 2020, doi: https://doi.org/10.4028/www.scientific.net/MSF.978.222
  76. Modeling and optimization of rolling process: A multi-objective approach
  77. Swain, P. T. R., Das, S. N., Patnaik, P. K., & Purohit, A., “The influence of moisture absorption on the mechanical and thermal properties of chemically treated DPL reinforced hybrid composite”, Materials Science Forum, vol. 978, pp. 316-322, 2020, doi: https://doi.org/10.4028/www.scientific.net/MSF.978.316
  78. WEDM microdrilling of 316 L stainless steel orthopedic implant
  79. Patnaik, P. K., Swain, P. T. R., Mishra, S. K., Purohit, A., & Biswas, S., “Recent developments on characterization of needle-punched nonwoven fabric reinforced polymer composites–A review”, Materials Today: Proceedings, vol. 26, pp. 466-470, 2020, doi: https://doi.org/10.1016/j.matpr.2019.12.086
  80. Reviewer acknowledgments and awards: Recognition awards for distinction of reviewing in 2019
    81. 2019
  81. Patnaik, P. K., Swain, P. T. R., & Purohit, A., “Selection of composite materials for structural applications through MCDM approach”, Materials Today: Proceedings, vol. 18, pp. 3454-3461, 2019, doi: https://doi.org/10.1016/j.matpr.2019.07.273
  82. Purohit, A., Satapathy, A., Swain, P. T. R., & Patnaik, P. K., “A study on erosion wear behavior of ld sludge reinforced polypropylene composite”, Materials Today: Proceedings, vol. 18, pp. 4299-4304, 2019, doi: https://doi.org/10.1016/j.matpr.2019.07.388
  83. Debasmita Pani, Punyapriya Mishra, Study of mechanical properties of natural fiber reinforced hybrid polymer composites, International journal of Advanced Mechanical Engineering, 9(1), 1-6
  84. Debasmita Pani, Punyapriya Mishra, Study of mechanical properties of natural fiber reinforced hybrid polymer composites, International journal of Advanced Mechanical Engineering, 9(1), 1-6
  85. Punyapriya Mishra, Narasingh Deep, Sagarika Pradhan, Vikram G Kamble “Effect of functionalized MWCNT on the mechanical and dielectric properties of PMMA nano composites”, International Journal of Nano Science, 18 (6), 1850035-304
  86. Punyapriya Mishra, Narasingh Deep, Sagarika Pradhan, Vikram G Kamble “Effect of functionalized MWCNT on the mechanical and dielectric properties of PMMA nano composites”, International Journal of Nano Science, 18 (6), 1850035-304
  87. Workspace optimisation of 3R manipulator-a multi-objective approach
  88. A comparative study of stability characteristics of mahua and jatropha biodiesel and their blends
  89. Dry turning of AISI D3 steel using a mixed ceramic insert: A study
  90. Patnaik, P. K., Swain, P. T. R., & Biswas, S., “Investigation of mechanical and abrasive wear behavior of blast furnace slag‐filled needle‐punched nonwoven viscose fabric epoxy hybrid composites”, Polymer Composites, vol. 40, no. 6, pp. 2335-2345, 2019, doi: https://doi.org/10.1002/pc.25090
    91. 2018
  91. Swain, P. T. R., & Biswas, S., “A comparative analysis of physico‐mechanical, water absorption, and morphological behaviour of surface modified woven jute fiber composites”, Polymer Composites, vol. 39, no. 8, pp. 2952-2960, 2018, doi: https://doi.org/10.1002/pc.24294
  92. Swain, P. T. R., Das, S. N., & Jena, S. P., (2018). “Manufacturing and Study of Thermo-Mechanical Behaviour of Surface Modified Date Palm Leaf/Glass Fiber Reinforced Hybrid Composite” Materials Today: Proceedings, vol. 5, no. 9, pp. 18332-18341, 2018, doi: https://doi.org/10.1016/j.matpr.2018.06.172
  93. Sourav Kumar Sahu , Sumanta Panda and Ajit Kumar Pattanaik An Algorithm for Online Path Planning of Mobile-Robot based on Displacement Vector Method, International Journal of Advanced Mechanical Engineering. Volume 8, Number 1 (2018), pp. 275-284
  94. P. Patro, Pneumatic conveying in horizontal pipes: Eulerian modeling and pressure drop characteristics, American Journal of Mathematical and Computational Sciences, 3 (1), 10-16 (2018),
  95. Narasingh Deep, Punyapriya Mishra “Fabrication and characterization of thermally conductive PMMA/MWCNT nanocomposites”, Materials Today Proceedings, 5(14), 28328-28336
  96. S Panda, SN Panda A multi objective optimum design approach for rolling element bearing International Journal on Interactive Design and Manufacturing (IJIDeM) 12 (3) 1095–1108 (2018)
  97. Narasingh Deep, Punyapriya Mishra “Fabrication and characterization of thermally conductive PMMA/MWCNT nanocomposites”, Materials Today Proceedings, 5(14), 28328-28336
  98. Debasmita Pani, Punyapriya Mishra, Tribological behavior of sponge gourd based hybrid reinforced polymer composite, International Journal of Advanced Mechanical Engineering, 8(1), Special edition, 89-96
  99. Biodiesel from Non-Edible Vegetable Oils: A Review on Engine Performance and Emission Characteristics
  100. Debasmita Pani, Punyapriya Mishra, Tribological behavior of sponge gourd based hybrid reinforced polymer composite, International Journal of Advanced Mechanical Engineering, 8(1), Special edition, 89-96
  101. S N Panda, S.Panda, D.S.Khamari, P.Mishra, “Re-examination for effect of ball race conformity on life of Rolling Element bearing using Metaheuristic, International Journal of Advanced Mechanical Engineering, 8 (1) 285-294
  102. S N Panda, S.Panda, D.S.Khamari, P.Mishra, “Re-examination for effect of ball race conformity on life of Rolling Element bearing using Metaheuristic, International Journal of Advanced Mechanical Engineering, 8 (1) 285-294
  103. Process parameter optimization of hydrostatic extrusion using metaheuristic
  104. Narasingh Deep, Punyapriya Mishra, “Evaluation of mechanical properties of functionalized carbon nano tube reinforced PMMA polymer nanocomposite”, Karbala International Journal of Modern Science, 4(2), 207-215
  105. Laser beam micro drilling–a review
  106. Narasingh Deep, Punyapriya Mishra, “Evaluation of mechanical properties of functionalized carbon nano tube reinforced PMMA polymer nanocomposite”, Karbala International Journal of Modern Science, 4(2), 207-215
  107. Tanushree Bera, S.K.Acharya, Punyapriya Mishra “Synthesis, mechanical, thermal Properties of carbon black/epoxy composites”, International Journal of Engineering, Science and Technology, 10 (4), 12-20
  108. Tanushree Bera, S.K.Acharya, Punyapriya Mishra “Synthesis, mechanical, thermal Properties of carbon black/epoxy composites”, International Journal of Engineering, Science and Technology, 10 (4), 12-20
    109. 2017
  109. Swain, P. T. R., & Biswas, S., “Influence of fiber surface treatments on physico-mechanical behaviour of jute/epoxy composites impregnated with aluminium oxide filler”, Journal of Composite Materials, vol. 51, no. 28, pp. 3909-3922, 2017, doi: https://doi.org/10.1177/0021998317695420
  110. Swain, P. T. R., & Biswas, S., “Abrasive wear behaviour of surface modified jute fiber reinforced epoxy composites”, Materials Research, vol. 20, pp. 661-674, 2017, doi: https://doi.org/10.1590/1980-5373-MR-2016-0541
  111. Swain, P. T. R., & Biswas, S., “Effect of moisture absorption on the mechanical properties of ceramic filled jute/epoxy hybrid composites”, IOP conference series: materials science and engineering vol. 178, no. 1, pp. 1-9, 2017 doi: 10.1088/1757-899X/178/1/012010
  112. S Panda, BB Biswal, SD Jena, D Mishra An approach to weight optimization of a spur gear Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 232(2) 189-202
  113. N Acharya, P Nanda, S Panda, S Acharya Analysis of properties and estimation of optimum blending ratio of blended mahua biodiesel Engineering Science and Technology, an International Journal 20 (2), 511-517
    114. 2016
  114. P. Patro, Effect of numerical parameters on pressure drop prediction in pneumatic conveying, Multiphase Science and Technology, 28 (3), (2016) 1–11.
  115. P. Patro, A. K. Barik, and B. Patro, Computational study of a turbulent gas-solid confined jet flow, Powder Technology, 297 (2016), 229-238.
  116. P. Patro, Computation of wall to suspension heat transfer in vertical pipes, Drying Technology, 34 (6) (2016), 703-712.
  117. Narasingh Deep, Punyapriya Mishra & Swadhin Kumar Patel, Abrasive wear behavior of graphite reinforced PMMA matrix composites, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) special issue, 329-334
  118. Narasingh Deep, Punyapriya Mishra & Swadhin Kumar Patel, Abrasive wear behavior of graphite reinforced PMMA matrix composites, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) special issue, 329-334
    119. 2015
  119. S Panda, D Mishra, BB Biswal, P Nanda Optimization of multiple response characteristics of EDM process using taguchi-based grey relational analysis and modified PSO Journal of Advanced Manufacturing Systems 14 (03), 123-148
  120. S Panda, SN Panda, P Nanda, D Mishra Comparative study on optimum design of rolling element bearing Tribology International 92, 595-604
  121. P. Patro, R. Gupta, and A. Khuntia. Numerical Study for the Prediction of Heat Transfer in a Pulsating Turbulent Flow in a Pipe, Procedia Engineering, 127 (2015), 854-861.
  122. A. K. Barik, A. Mukherjee and P. Patro, Heat transfer enhancement from a mini rectangular channel with different surface protrusions by a turbulent cross flow jet, International Journal of Thermal Science, 98 (2015), 32-41.
  123. Narasingh Deep, Punyapriya Mishra, Fabrication, Modeling and Analysis of The Erosive Wear Properties of Multi Walled Carbon Nanotube Reinforced PMMA Composite Using Taguchi Approach, Int. J. Recent Sci. Res, 6, 10, 6802-6806
  124. Narasingh Deep, Punyapriya Mishra, Fabrication, Modeling and Analysis of The Erosive Wear Properties of Multi Walled Carbon Nanotube Reinforced PMMA Composite Using Taguchi Approach, Int. J. Recent Sci. Res, 6, 10, 6802-6806
    125. 2014
  125. S Panda, D Mishra, BB Biswal, M Tripathy Revolute manipulator workspace optimization using a modified bacteria foraging algorithm: A comparative study Engineering Optimization 46 (2), 181-199
  126. Swain, P. T. R., & Biswas, S., “Selection of materials using multi criteria decision making method by considering physical and mechanical properties of jute/Al2O3 composites”, Applied Mechanics and Materials, vol. 592, pp. 729-733, 2014, doi: https://doi.org/10.4028/www.scientific.net/AMM.592-594.729
  127. A. K. Barik, S. Dash, P. Patro and S. Mohapatra, Experimental and numerical investigation of air entrainment into a louvered funnel, Applied Ocean Research, 48 (2014), 176-185.
  128. P. Patro, B. Patro and S. Murugan, Prediction of Two-Phase Heat Transfer and Pressure Drop in Dilute Gas-Solid Flows: A Numerical Investigation, Drying Technology, 32 (10) (2014), 1167-1178.
  129. Punyapriya Mishra & Tanushree Bera. “Fabrication and characterization of composite using carbon black-waste from petroleum products.” International Journal of Advanced Research (IJAR), Volume 2, Issue 7, 122-130
  130. P. Patro and S. Dash, Two-fluid modeling of particulate two-phase flows in vertical pipes, Powder Technology, 264 (2014), 320–331.
  131. Punyapriya Mishra & Tanushree Bera. “Fabrication and characterization of composite using carbon black-waste from petroleum products.” International Journal of Advanced Research (IJAR), Volume 2, Issue 7, 122-130
  132. Punyapriya Mishra, “Mechanical behavior of bagasse fiber reinforced epoxy composites at liquid nitrogen temperature”. Journal of Solid waste Technology and Management, Vol. 40, No.3, Page No.197-202
  133. Punyapriya Mishra, “Mechanical behavior of bagasse fiber reinforced epoxy composites at liquid nitrogen temperature”. Journal of Solid waste Technology and Management, Vol. 40, No.3, Page No.197-202
  134. P. Patro and S. Dash, Prediction of acceleration length in turbulent gas-solid flows, Advanced Powder Technology, 25 (2014), 1643-1652.
  135. P. Patro and S. Dash, Computations of particle-laden turbulent jet flows based on Eulerian model, ASME Journal of Fluids Engineering, 136 (2014), 011301 1-16.
  136. P. Patro and S. Dash, Numerical simulation for Hydrodynamic analysis and pressure drop prediction in horizontal gas-solid flows, Particulate Science and Technology, 32 (1) (2014), 94-103.
  137. Swain, P. T. R., & Biswas, S., “Physical and mechanical behavior of Al2O3 filled jute fiber reinforced epoxy composites”, International Journal of Current Engineering and Technology, vol. 2, pp. 67-71, 2014, doi: http://dx.doi.org/10.14741/ijcet/spl.2.2014.13.
    138. 2013
  138. S. Jena and P. Patro, Computational Investigation of Suction in Taylor-Couette Pump, International Journal of Current Engineering and Technologies, 3(1) (2013) 21-24.
  139. S. Jena, P. Patro and S. S. Behera, Multi-Objective Optimization of Design Parameters of a Shell &Tube type Heat Exchanger using Genetic Algorithm, International Journal of Current Engineering and Technologies, 3(4) (2013), 1379-1386.
  140. P. Patro, B. Patro, Kinetic theory based CFD modeling of particulate flows in horizontal pipes, International Journal of Mathematical Sciences, 7(3) 2013, 451-457.
  141. Punyapriya Mishra, “Statistical analysis for the abrasive wear behavior of bagasse fiber reinforced polymer composite”. International Journal of Applied research in Mechanical Engineering (IJARME) Vol. 2, Issue 3, P. 154-158
  142. Punyapriya Mishra, “Statistical analysis for the abrasive wear behavior of bagasse fiber reinforced polymer composite”. International Journal of Applied research in Mechanical Engineering (IJARME) Vol. 2, Issue 3, P. 154-158
    143. 2012
  143. B. Patro, S. Murugan and P. Patro, Numerical modeling of gas-solid flow in a horizontal pipe, Multiphase Science and Technology, 24(4) (2012), 299-322.
  144. P. Patro, S. Jena and B. Patro, Numerical Modeling of Dilute Particulate Flows in Horizontal and Vertical Pipes, International Journal of Current Engineering and Technologies, 2(3) (2012) 300-304.
  145. P. Patro, B. Patro and A. Barik, CFD simulation of a Conjugate Heat Transfer Problem in a Rectangular Cavity , International Journal of Thermal Technologies, 2(2) (2012) 148-152.
  146. S Panda, D Mishra, BB Biswal, BB ChoudhuryRobot workspace optimization using a novel modified differential evolutionary technique International Journal of Computational Methods 9 (03), 1250034
  147. S Panda, D Mishra, BB Biswal Revolute manipulator workspace optimization: A comparative study Applied Soft Computing 13 (2), 899-910
  148. Gujjala Raghavendra, S.K.Acharya. C.R.Deo, P.Mishra “Fabrication-modelling and analysis on tribological performance of natural composites using taguchi approach.” Procedia Engineering, Volume 38, p.2635-2644
  149. Gujjala Raghavendra, S.K.Acharya. C.R.Deo, P.Mishra “Fabrication-modelling and analysis on tribological performance of natural composites using taguchi approach.” Procedia Engineering, Volume 38, p.2635-2644
    150. 2011
  150. Punyapriya Mishra and S.K.Acharya. “Study on dielectric properties of bagasse fiber reinforced epoxy composite.” Journal of Inventi. Volume 2, No.1
  151. Punyapriya Mishra and S.K.Acharya. “Study on dielectric properties of bagasse fiber reinforced epoxy composite.” Journal of Inventi. Volume 2, No.1
  152. Samir Kumar Acharya, Punyapriya Mishra and Suraj Kumar Mehar. “Effect of surface treatment on the mechanical properties of bagasse fiber reinforced polymer composite.” Journal of Bioresources. Volume 6, No. 3, pp. 3155-3165
  153. Samir Kumar Acharya, Punyapriya Mishra and Suraj Kumar Mehar. “Effect of surface treatment on the mechanical properties of bagasse fiber reinforced polymer composite.” Journal of Bioresources. Volume 6, No. 3, pp. 3155-3165
  154. S Panda, D Mishra, BB Biswal Determination of optimum parameters with multi-performance characteristics in laser drilling—a grey relational analysis approach The International Journal of Advanced Manufacturing Technology 54 (9), 957-967
    155. 2010
  155. Punyapriya Mishra and S.K.Acharya. “Effect of fiber loading on the abrasive wear behaviour of bagasse fiber reinforced epoxy composite.” Journal of Tribology Research, Volume 1, No. 2, pp. 59-64
  156. Punyapriya Mishra and S.K.Acharya. “Effect of fiber loading on the abrasive wear behaviour of bagasse fiber reinforced epoxy composite.” Journal of Tribology Research, Volume 1, No. 2, pp. 59-64
  157. Punyapriya Mishra & S.K.Acharya. “Solid particle erosion of bagasse fiber reinforced epoxy composite.” International Journal of Physical Science, Volume 5, No.2, pp. 109-115
  158. Punyapriya Mishra & S.K.Acharya. “Solid particle erosion of bagasse fiber reinforced epoxy composite.” International Journal of Physical Science, Volume 5, No.2, pp. 109-115
  159. Punyapriya Mishra and S.K.Acharya. “Anisotropy abrasive wear behaviour of bagasse fiber reinforced polymer composite.” International Journal of Engineering, Science and Technology, Volume 2, No. 11, pp. 104-112.
  160. Punyapriya Mishra and S.K.Acharya. “Anisotropy abrasive wear behaviour of bagasse fiber reinforced polymer composite.” International Journal of Engineering, Science and Technology, Volume 2, No. 11, pp. 104-112.
  161. S Panda, D Mishra Test-Rigs for Dynamically Loaded Journal Bearing: A Study SAE Technical Paper
  162. S Panda, D Mishra Development of a tribological failure knowledge model International Journal of Knowledge Engineering and Data Mining 1 (2), 99-114
  163. A. Dewan, P. Patro, I Khan, P Mahanta, Effect of Fin Spacing and Material on Performance of Circular Pin Fin Heat Sink, Proc. of IMechE, Part A, Journal of Power and Energy, 224 (2010) 35-46.
    164. 2009
  164. P.Mishra & Dr. S.K.Acharya, S.K.Mehar. “The influence of fiber treatment on the performance of bagasse fiber reinforced polymer composite.” International Journal of Reinforced plastics and Composites, Volume 28, No. 24, pp.3027-3036.
  165. P.Mishra & Dr. S.K.Acharya, S.K.Mehar. “The influence of fiber treatment on the performance of bagasse fiber reinforced polymer composite.” International Journal of Reinforced plastics and Composites, Volume 28, No. 24, pp.3027-3036.
  166. S Panda, D Mishra A multi-objective optimum design of dynamically loaded journal bearing for a prescribed π extent film SAE Technical Paper
  167. A. Dewan, V. Bharti, V. Mathur, U.K. Saha, P. Patro, A Comparison of Tapered and Straight Circular Pin Fin Compact Heat Exchangers for Electronic Appliances, Journal of Enhanced Heat Transfer, 16(3) (2009) 301-314.
    168. 2008
  168. P.Mishra & Dr. S.K.Acharya, S.K.Meher, V.Dikshit “Weathering behavior of bagasse fiber reinforced polymer composite.” International Journal of Reinforced plastics and Composites, Volume 27, No. 16-17, pp.1839-1846.
  169. P.Mishra & Dr. S.K.Acharya, S.K.Meher, V.Dikshit “Weathering behavior of bagasse fiber reinforced polymer composite.” International Journal of Reinforced plastics and Composites, Volume 27, No. 16-17, pp.1839-1846.
  170. P.Mishra & Dr. S.K.Acharya, V.Dikshit “Erosive wear behavior of red mud filled metal matrix composite.” International Journal of Reinforced plastics and Composites, Volume 27, No. 2, pp.145-152.
  171. P.Mishra & Dr. S.K.Acharya, V.Dikshit “Erosive wear behavior of red mud filled metal matrix composite.” International Journal of Reinforced plastics and Composites, Volume 27, No. 2, pp.145-152.
  172. Dr. S.K.Acharya, P.Mishra, Dr.S.C.Mishra “Effect of environment on the mechanical properties of fly ash – jute – polymer Composite.” Indian Journal of Engineering and Material Science, Volume 15, No. 6, pp. 483-488.
  173. Dr. S.K.Acharya, P.Mishra, Dr.S.C.Mishra “Effect of environment on the mechanical properties of fly ash – jute – polymer Composite.” Indian Journal of Engineering and Material Science, Volume 15, No. 6, pp. 483-488.
  174. Sarojrani Pattnaik, Mihir Kumar Sutar (2015). “Multi Objective Optimization of the EMS processed IC by Grey-Fuzzy Method”, Materials Today: Proceedings, vol. 2(4-5), pp. 2555-2563, 2015. (Scopus).
  175. Sarojrani Pattnaik, D.B. Karunakar and P.K. Jha, Parametric optimization of the investment casting process using utility concept and Taguchi method, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications, DOI: 10.1177/1464420713487654, 2013.
  176. Pradhan P., Rana J and Mishra C., "Effect of hardening on fatigue life of C-40 steel’’ Strength, Fracture and Complexity, Vol. 7, 2011, pp. 273-283.
  177. S. K. Sarangi, A. Chattopadhyay, A. K. Chattopadhyay Effect of pretreatment methods and chamber pressure on morphology, quality and adhesion of HFCVD diamond coating on cemented carbide inserts Applied Surface Science, Elsevier Science 2.711 254 (2008) 3721 10.1016/j.apsusc.2007.10.104
  178. Vikrant Chandrakar, Arnab Mukherjee, Jnana Ranjan Senapati and Aurovinda Mohanty, “Entropy Generation Study of Turbine Exhaust Gas Through an Infrared Suppression Device”, Journal of Thermophysics and Heat Transfer, 2021, Pages: 1-12. https://doi.org/10.2514/1.T6411
  179. Sahu SK, Mishra D, Mahto RP, Sharma VM, Pal SK, Pal K, Banerjee S, Dash P. Friction stir welding of polypropylene sheet, Engineering Science and Technology, an International Journal.2018; 21 (2): 245-254
  180. AnoopKumar Sahoo, Santosh Kumar Sahu, SauravDatta, SibaSankarMahapatra, (2015) Supply Chain flexibility assessment and decision-making: a fuzzyintelligentapproach, International Journal of Business Excellence, 8(6):675-699, IndersciencePublishers, Switzerland. DOI: 10.1504/IJBEX.2015.072305
  181. Mishra, P. C.,Pandey, R.K., Athre, K., (2006)''Temperature Profile of an Elliptic Bore Journal Bearing’’, Tribology International: ELSEVIER, 40, 2007, pp 453- 458.DOI: http://dx.doi.org/10.1016/j.triboint.2006.04.009. (IF -3.517)
  182. Mishra P.C. (2011) “Thermal analysis of elliptic bore journal bearing considering shaft misalignment” Tribology Online, Japanese Societies of Tribologists, 6 (5), 239-246. DOI:http://dx.doi.org/10.2474/trol.6.239 
  183. Barik. H. and Chang, K.S. “Simulation of Two-phase flows with phase change by HLL scheme.” Physics of Fluids, In Preparation, (2016).
  184. Satapathy B.B., Rana J. and Maity K.P., "Effect of Process Parameters in Laser Drilling", International Journal of Applied Engineering Research, Vol-6, No.18,2011, pp. 2258-2262.
  185. Rahul Ray, Aurovinda Mohanty*, Pandab Patro and Kartik Tripathy, “Performance enhancement of heat sink with branched and interrupted fins”, International Communications in Heat and Mass Transfer, Volume 133,2022, Pages: 1-11. https://doi.org/10.1016/j.icheatmasstransfer.2022.105945
  186. Mihir Kumar Sutar, Pushpraj Mani Pathak, A.K. Sharma, N.K. Mehta, V.K. Gupta (201). “Inverse Kinematic and Control of 4- Degree of Freedom Wire Actuated In-Vivo Robot,” Journal of Systems and Control Engineering, vol. 229(2), pp.77-91, 2015, SCI, Impact Factor- 1.714.
  187. Sarojrani Pattnaik, D.B. Karunakar and P.K. Jha, Modeling and parametric optimization of investment casting process by uniting desirability function approach and fuzzy logic, Journal of Intelligent and Fuzzy Systems - IOS Press 10.3233/IFS-130809, 2013.
  188. Dash P, Singh BN. Static response of geometrically nonlinear laminated composite plates having uncertain material properties. Mechanics of Advanced Materials and Structures. 2015; 22 (4): 269-280
  189. Santosh Kumar Sahu, SauravDatta, SarojKumar Patel, SibaSankarMahapatra, (2013) Supply Chain Performance Appraisement, Benchmarking and Decision-Making: Empirical StudyusingGrey Theory and Grey-MOORA, International Journal of Process Management and Benchmarking,3(3):233-289, IndersciencePublishers, Switzerland. DOI: 10.1504/IJPMB.2013.058155
  190. ChhabiRam Matawale, SoumyaPanigrahi, Santosh Kumar Sahu, SauravDattaand SibaSankarMahapatra, (2014) Fuzzy-TOPSIS for Appropriate Site Selection for Establishing aThermalPower Plant, Applied MechanicsandMaterials,619:385-389.TransTechPublications, Switzerland. DOI: 10.4028/ www.scientific.net/AMM.619.385.
  191. Satapathy B.B., Rana J, Maity K.P. and Biswal S., "Optimization of Process Parameter in Laser Percussion Drilling". International Journal of Creative Mathematical Science and Technology. Vol. 17, No.25, 2012, pp. 17-25.
  192. Vikrant Chandrakar, Arnab Mukherjee, Jnana Ranjan Senapati and Aurovinda Mohanty, “Conjugate free convection with surface radiation from real-scale IRS system with multiple conical funnels: A numerical analysis”, International Communications in Heat and Mass Transfer, Volume 134, 2022. https://doi.org/10.1016/j.icheatmasstransfer.2022.106004
  193. Dash P, Singh BN. Buckling and post-buckling response of laminated composite plate with random system properties. Mechanics of Advanced Materials and Structures. 2014; 21 (6): 516-529
  194. A. Garg, C.S. Vikram, S. Gupta, Mihir Kumar Sutar, P.M. Pathak, A.K. Sharma, N.K. Mehta, V.K. Gupta (2014). “Design and Development of In-Vivo Robot for Biopsy,” Journal of Mechanics Based Design of Structures and Machines, vol. 42, pp. 278-295, 2014, SCI, Impact Factor – 2.286.
  195. Sarojrani Pattnaik, P.K. Jha, D.B. Karunakar, A novel method of increasing ceramic shell permeability and optimizing casting shrinkage and tensile strength of the investment cast parts, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, DOI: 10.1177/0954405415606386, 2015.
  196. Mishra P.C. (2014) “Effect of surface forces on Ultra thin film lubrication” ISRN Tribology: Hindawi:. http://dx.doi.org/10.1155/2014/612195
  197. Barik. H. “Numerical simulation of two-phase quasi-1D bubbly cavitating nozzle flow solutions” Shock Waves, In Preparation,(2016).
  198. Mishra P.C.(2013) “Modeling for friction of four stroke four cylinder petrol engine”Tribology in Industry, 35(3), pp.237-245.(SNIP-1.44)
  199. Barik. H. and Chang, K.S. “ Numerical study of shock wave interaction with aqueous foams” Shock Waves, In Preparation, (2016).
  200. Satapathy B.B., Rana J. and Maity K.P., "Quality Optimization of microhole in Laser Drilling" IOSR Journal of Engineering, Mar-2012, Vo. 2(3), pp. 382-388.
  201. Vikrant Chandrakar, Jnana Ranjan Senapati & Aurovinda Mohanty, “Conjugate heat transfer due to conduction, natural convection, and radiation from a vertical hollow cylinder with finite thickness, Numerical Heat Transfer, Part A: Applications, 2020,Pages: 1-25. https://doi.org/10.1080/10407782.2020.1847524
  202. Santosh Kumar Sahu, SauravDatta, SarojKumar Patel, SibaSankarMahapatra, (2013) Supply Chain Performance Appraisement Platform: Exploration of Interval-Valued Fuzzy Sets Theory, International Journal of Mechanical Engineering Research, 3(2):108-112. Research India Publications, New Delhi.
  203. Mihir Kumar Sutar, P.M. Pathak, A.K. Sharma, N.K. Mehta, V.K. Gupta, (2013). “Forward Kinematic Analysis of In- Vivo Robot for Stomach Biopsy,” Journal of Robotic Surgery, vol. (7), pp. 281- 287. (Scopus)
  204. Sarojrani Pattnaik , Mihir Kumar Sutar, Jayadev Rana, Multi-objective optimization of the EMS processed IC by grey-fuzzy method, Materials Today: Proceedings, 2(4), 2555-2561, 2015.
  205. Dash P, Singh BN. Geometrically nonlinear free vibration of laminated composite plate embedded with piezoelectric layers having uncertain material properties. Journal of Vibration and Acoustics. 2012; 134 (6): 1-13
  206. L. Sardan, Mihir Kumar Sutar, P.M. Pathak (2013). “A Geometric Approach for Inverse Kinematics of a 4-link Redundant Manipulator,” Robotics & Autonomous System, vol. 61(12), pp. 1306-1313. SCI, Impact Factor- 3.12.
  207. Mihir Kumar Sutar, Sarojrani Pattnaik  and Jayadev Rana, Neural Based Controller for Smart Detection of Crack in Cracked Cantilever Beam, Materials Today: Proceedings,  2(4), 2648-2653, 2015.
  208. Satapathy B.B., Rana J., Maity K.P. and Biswal S. "Experimental Study in the process parameters in Laser Percussion Drilling". International Journal of Scientific and Engineering Research Vol. 4, Issue-5, May-2013, pp. 36-39.
  209. Ashok K. Barik, Arouvinda Mohanty, Jnana R. Senapati, Mohamed M. Awad, “Constructural design of different ribs for thermos-fluid performance enhancement of a solar air heater (SAH)”, International Journal of Thermal Science, Volume 160, 2020, Pages: 1-14. https://doi.org/10.2514/1.T6411
  210. Dash P, Singh BN. Buckling and post-buckling of laminated composite plates. Mechanics Research Communications. 2012; 46: 1-7
  211. Santosh Kumar Sahu, SauravDatta, SarojKumar Patel, SibaSankarMahapatra, (2013) Supply Chain performance appraisement Platform in Fuzzy Context, International Journal of Information &ComputationTechnology,3(1):74-77. International Research Publication House, NewDelhi.
  212. Mishra P.C.(2014) “Analysis of a rough elliptic bore journal bearing using expectancy model of roughness characterization”Tribology in Industry, 36(2), pp.211-219.(SNIP-1.44)
  213. Barik, H. and Chatterjee, A., “Complex shock wave reflection configurations in shock-vortex interactions.” Fluid Dynamics Research, Under revision, (2015).
  214. Chang, K. S., Barik, H. and Chang, S. M., “The fundamental shock−vortex interaction patterns that depend on the vortex flow regimes.” Journal of Computational Fluids Engineering, 14(4), (2009), pp. 70-79.
  215. Mishra P.C.(2012) “Isothermal analysis of elliptic bore journal bearing considering isotropic roughness”International Journal of Mechanical & Mechatronics Engineering, 12(4), pp.24-31.(SNIP-1.44)
  216. Mihir Kumar Sutar (2012). Finite Element Analysis of a Cracked Cantilever Beam, International Journal of Advanced Engineering Research and Studies, vol.1 (2), pp. 285-289, 2012.
  217. Mihir Kumar Sutar and Sarojrani Pattnaik, Vibration characteristics of a cracked cantilever beam under free vibration, Noise and Vibration worldwide, 16-21, 41 (9), 2010.
  218. Mohanty U.K. and Rana J., "Parametric Optimization of EDM process using Weighted signal to noise Ratio". International Journal of Material Sciences and Manufacturing Engineering, April 2015 Vol. 42, Issue- I, pp. 1187-1193.
  219. Ajay Gupta, Gautam, Satyabrata Sahoo, Aurovinda Mohanty, “ Perforamance evaluation of porous fin with prescribed tip temperature: An analytical and numerical approach”, International Journal of Heat and Mass Transfer, Volume 156, 2020 Pages: 1-16. https://doi.org/10.1016/j.ijheatmasstransfer.2020.119736
  220. Santosh Kumar Sahu, SauravDatta, SarojKumar Patel, SibaSankarMahapatra, (2013) Decision-making scenario towards supply chain performance Assessment in Fuzzy Context, International Journal of Engineering Research and Technology, 6(4):541-556. International Research Publication House, New Delhi.ISSN 0974-3154
  221. Dash P, Singh BN. Geometrically nonlinear bending analysis of laminated composite plate.Communications in Nonlinear Science and Numerical Simulation. 2010; 15 (10): 3170-3181
  222. Ranjan, R., Surekha, B., Ghose, P., Mishra, P.C. Regression model based properties prediction of A356 aluminum alloy rheocast using cooling slope technique. Discov Appl Sci 6, 90 (2024). IF: 2.6 (SCIE), ISSN: 3004-9261, https://doi.org/10.1007/s42452-024-05720-9.
  223. Sasmita Kar, Sarojrani Pattnaik, Mihir Kumar Sutar (2024). Assessment of mechanical and thermal properties of hybrid co-woven biofiber polymer composites. Industrial Crops and Products, vol. 222 (3), pp. 119756, https://doi.org/10.1016/j.indcrop.2024.119756. SCIE, IF- 5.6.
  224. Biswal, S., Das, S.R., Saha, N., Mishra, P.C. Environmental sustainability assessment of gasoline and methanol blended smart fuel for reduced emission formation. Environ Dev Sustain 26, 26753–26784 (2024). IF: 4.7 (SCI), ISSN: 1573-2975, https://doi.org/10.1007/s10668-023-03752-6.
  225. Pradhan SK, Gupta A, Mishra PC. Investigating into the Effects of Bore Irregularities on the Hydrodynamic Performance Journal Bearing Using Response Surface Methodology. Tribology in Industry, Volume 45, No 2, 2023, Pages 201-211, IF: (SCOPUS), ISSN: 0354-8996, DOI: 10.24874/ti.1431.01.23.03.
  226. Sasmita Kar, Sarojrani Pattnaik, Mihir Kumar Sutar (2024). Influence of nano industrial waste and short coir fiber filler on hybrid inter and intra yarn bio fiber composites. Journal of Elastomers & Plastics, vol. 56 (8), pp. 958-983, https://doi.org/10.1177/00952443241289539. SCIE, IF-1.4.
  227. Sasmita Kar, Sarojrani Pattnaik, Mihir Kumar Sutar (2024). Characteristic study of intra woven green fibers for structural application. International Journal of Materials Research, vol. 115, no. 11-12, pp. 1044-1055. https://doi.org/10.1515/ijmr-2024-0040. SCIE, IF – 0.7.
  228. Mishra, P.C.; Roychoudhury, A.; Banerjee, A.; Saha, N.; Das, S.R.; Das, A. Coated Piston Ring Pack and Cylinder Liner Elastodynamics in Correlation to Piston Subsystem Elastohydrodynamic: Through FEA Modelling. Lubricants 2023, 11, 192. IF: 3.1 (SCIE), ISSN: 2075-4442, https://doi.org/10.3390/lubricants11050192.
  229. Saha, N.; Mishra, P.C. Modified Whale Algorithm-Based Optimization for Fractional Order Concurrent Diminution of Torque Ripple in Switch Reluctance Motor for EV Applications. Processes 2023, 11, 1226. IF: 2.8 (SCIE), ISSN: 2227-9717, https://doi.org/10.3390/pr11041226.
  230. Amit Kumar Gantayat, Mihir Kumar Sutar, Jyoti Ranjan Mohanty, Sarojrani Pattnaik (2024). Free vibration analysis of an O-pattern graphene reinforced axial functionally graded polymer matrix nano-composite non-uniform beam. Journal of Elastomers & Plastics, vol. 56 (7), pp. 897-906, https://doi.org/10.1177/00952443241281986. SCIE, IF – 1.4.
  231. Sasmita Kar, Saismita Behera, Sandeep Bhoi, Sarojrani Pattnaik, Mihir Kumar Sutar (2024). Effect of bio nanofiller in influencing the carbon and E-glass fabric reinforced composites. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, vol. 238 (10), pp. 1929 -1941, https://doi.org/10.1177/146442072412369. SCIE, IF - 2.5.
  232. Saha, N.; Mishra, P.C. A Multi-Objective Hybrid BESSA Optimization Scheme for Parameter Extraction from PV Modules. Appl. Sci. 2023, 13, 4705. IF: 2.5 (SCIE), ISSN: 2076-3417, https://doi.org/10.3390/app13084705.
  233. Biswal, S.; Mishra, P.C. Piston Compression Ring Elastodynamics and Ring–Liner Elastohydrodynamic Lubrication Correlation Analysis. Lubricants 2022, 10, 356. IF: 3.1 (SCIE), ISSN: 2075-4442, https://doi.org/10.3390/lubricants10120356.
  234. Amit Kumar Gantayat, Mihir Kumar Sutar, Jyoti Ranjan Mohanty, Sarojrani Pattnaik (2024). Analysis of free vibration characteristics of non-uniform graphene-reinforced axially functionally graded nanocomposite beam. Advanced Composite Materials, 1–21. https://doi.org/10.1080/09243046.2024.2407956. SCIE, IF -1.8.
  235. Sasmita Kar, Ipsita Jena, Sandeep Bhoi, Sarojrani Pattnaik, Mihir Kumar Sutar (2023). Impact of distinct alkaline treatment on natural plant fibre reinforced polymer composites. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 237 (24), pp. 5951-5962, https://doi.org/10.1177/09544062231168723. SCI, IF -1.8.
  236. Pradhan, S.K.; Kumar, R.; Mishra, P.C. Grey-Fuzzy Hybrid Optimization for Thermohydrodynamic Performance Prediction of Misaligned Rough Elliptic Bore Journal Bearing. Lubricants 2022, 10, 274. IF: 3.1 (SCIE), ISSN: 2075-4442, https://doi.org/10.3390/lubricants10100274.
  237. Mishra, P.C.; Gupta, A.; Samanta, S.; Ishaq, R.B.; Khoshnaw, F. Framework for Energy-Averaged Emission Mitigation Technique Adopting Gasoline-Methanol Blend Replacement and Piston Design Exchange. Energies 2022, 15, 7188. IF: 3.0 (SCIE), ISSN: 1996-1073, https://doi.org/10.3390/en15197188.
  238. Sasmita Kar, Suryakanta Mishra, Sarojrani Pattnaik, Mihir Kumar Sutar (2023). Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 237 (20), pp. 4759-4768. https://doi.org/10.1177/0954406223115408. SCI, IF -1.8.
  239. Dash P, Singh BN. Nonlinear free vibration of piezoelectric laminated composite plate. Finite Elements in Analysis and Design. 2009; 45 (10): 686-694
  240. Mihir Kumar Sutar, D.R.K. Parhi (2010). “Smart Detection of Damage in a Cracked Cantilever Beam using Artificial Intelligence”. Noise & Vibration Worldwide, vol. 41 (5), pp. 26- 36. (Scopus).
  241. Sarojrani Pattnaik, D.B. Karunakar and P.K. Jha, Application of computer simulation for finding optimum gate location in plastic injection moulding, International Journal of Advanced Engineering Resesarch and studies, 1 (2), 159-161, 2012.
  242. Santosh Kumar Sahu, SauravDatta, SarojKumar Patel, and SibaSankarMahapatra, (2013) Industrial Supply Chain Performance Benchmarking using Fuzzy Grey Relation Method, Global Journal of Management and Business Studies,3(7):775-784,ResearchIndiaPublications, NewDelhi.ISSN 2248-9878
  243. I Nayak and J Rana., "Selection of a Suitable Multi-response Optimization Technique for Turning Operation", Decision Science Letter-5, July 2015,pp 129-142.
  244. Aurovinda mohanty, Santosh Kumar Senapti and Sukanta K. Dash, “Natural convection cooling of an Infrared suppression device (IRS) with conical funnels- a computational approach”, International Communications in Heat and Mass Transfer, Volume 118, 2020, Pages: 1-13. https://doi.org/10.1016/j.icheatmasstransfer.2020.104891
  245. Chang, K. S., Barik, H. and Chang, S. M., “The shock−vortex interaction patterns affected by vortex flow regimes and vortex models.” Shock Waves, 19, (2009), pp. 349-360.
  246. Mishra P.C.(2014) “A review on piston compression ring tribology”Tribology in Industry, 36(3), pp.269-280.(SNIP-1.44)
  247. Pradhan, S.K.; Kumar, R.; Mishra, P.C. Computer Simulation and Optimization Elliptic Bore Journal Bearing, Tribology in Industry, 44(1):322-333 2022, IF: (SCOPUS), ISSN: 0354-8996, DOI:10.24874/ti.1179.09.21.01.
  248. Sarojrani Pattnaik, Mihir Kumar Sutar (2022). Preparation and analysis of a hybrid ceramic shell for investment casting. The International Journal of Advanced Manufacturing Technology, vol. 122 (5), pp. 2513-2527. https://doi.org/10.1007/s00170-022-10054-0. SCIE, IF - 2.9.
  249. Mishra, PC, Ishaq, R. and Khoshnaw, F. (2020) Mitigation Strategy of Carbon Dioxide Emissions through Multiple Muffler design exchange and Gasoline-Methanol blend replacement. Journal of Cleaner production, ELSEVIER,286, 125460. IF:11.072(SCI), ISSN: 0959-6526, https://doi.org/10.1016/j.jclepro.2020.125460.
  250. Roychoudhury A, Banerjee A, Mishra PC, Khoshnaw F (2020) An FEA Material Strength Modelling of a Coated Engine Piston. Materials Today: Proceedings: ELSEVIER. 44(1), pp.1320-1325. IF: (SCOPUS), ISSN: 2214-7853, https://doi.org/10.1016/j.matpr.2020.11.387.
  251. A. Jena, S. K. Pattnaik, S. K. Sarangi, The performance of advanced cutting tools used for dry machining of aluminium, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Springer, 2.2 SCIE, 46 (2024) 441, 10.1007/s40430-024-05025-3
  252. Ramya Prakash Sahu, Mihir Kumar Sutar, Sarojrani Pattnaik (2021). A Generalized Finite Element Approach towards the Free Vibration Analysis of Non-uniform Axially Functionally Graded Beam. Scientia Iranica, vol. 29 (2), pp. 556-571. doi: 10.24200/sci.2021.57274.5151. SCIE, IF - 1.4.
  253. A. Jena, B. B. Palei S. K. Pattnaik, S. K. Sarangi, AFM, Nano-indentation and TEM characterization study of HFCVD diamond on Tantalum and Diamond seeded cemented carbide inserts, Int. J. Refractory Metals and Hard Materials, Elsevier Science, 3.6 SCI 118 (2024) 106503, 10.1016/j.ijrmhm.2023.106503
  254. Sarojrani Pattnaik, Mihir Kumar Sutar (2021). "Enhancement of Ceramic Slurry Rheology in Investment Casting Process". Arabian Journal for Science and Engineering (2021), https://doi.org/10.1007/s13369-021-05834-x. SCI, Impact Factor:2.334.
  255. 14. Pradhan SK, Kumar R, Mishra PC (2020). Material Modeling and Optimization of Rough Elliptic bore Journal bearing. Materials Today: Proceedings: ELSEVIER. 44(1), pp.1021-1027. IF: (SCOPUS), ISSN: 2214-7853, https://doi.org/10.1016/j.matpr.2020.11.174.
  256. Gupta,A., Mishra, P.C.(2020) Methanol and petrol blended alternate fuel for future sustainable engine: A performance and emission analysis. Measurement, 155. https://doi.org/10.1016/j.measurement.2020.107519   (IF -2.826)
  257. A. Jena, S. K. Pattnaik, B. B. Palei, S. K. Sarangi Synthesis of diamond crystal growth on tungsten carbide inserts by HFCVD using various seeding powders Applied Physics A, Springer 2.584 SCI 128 (2022) 287 10.1007/s00339-022-05417-z
  258. Sarojrani Pattnaik, Mihir Kumar Sutar (2021). "Influence of Ultra- Sonic Drilling on Colloidal Silica Based Ceramic Moulds for Investment Casting". Sillicon, https://doi.org/10.1007/s12633-021- 01166-5. SCI, Impact Factor:2.670.
  259. Sarojrani Pattnaik, Mihir Kumar Sutar (2021) "Effect of Saw Dust Content on Slurry Rheology and Mechanical Properties of the Investment Casting Ceramic Shell". International Journal of Metalcasting, vol. 15, pp. 470–487, https://doi.org/10.1007/s40962- 020-00478-3. SCI, Impact Factor: 1.805.
  260. L. R. Bhandarkar, P. P. Mohanty, S. K. Sarangi Experimental study and multi-objective optimization of process parameters during turning of 100Cr6 using C-type advanced coated tools Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 1.762 SCOPUS 235 (2021) 7634-7654 10.1177/09544062211043144 journals.sagepub.com/home/pic
  261. Mishra PC (2020) Thermal Modeling of Thin Lubricant Film Within Piston Compression Ring and Rough Cyliner Liner Conjuction. Front. Mech. Eng. 5:68. doi:10.3389/fmech.2019.00068
  262. Sahu, P., Mishra, P.C. Combine experimental and FEM analysis of adhesive bonded single lap joint with Al-alloy flat adherends and pre-embedded artificial defects. SN Appl. Sci. 1, 1455 (2019). https://doi.org/10.1007/s42452-019-1535-8
  263. Sarojrani Pattnaik, Mihir Kumar Sutar (2021). "Advanced Taguchi- Neural Network Prediction Model for Wire Electrical Discharge Machining Process". Advanced Taguchi-Neural Network Prediction Model for Wire Electrical Discharge Machining Process. Process Integration and Optimization for Sustainability, vol.5, pp. 159–172. https://doi.org/10.1007/s41660-020-00148-1. (Scopus).
  264. L. R. Bhandarkar, M. Behera, P. P. Mohanty, S. K. Sarangi Experimental investigation and multi-objective optimization of process parameters during machining of AISI 52100 using high performance coated tools Measurement, Elsevier Science 3.464 SCOPUS 172 (2021) 108842 February 2021 https://doi.org/10.1016/j.measurement.2020.108842
  265. Satyajit Dwivedi, Sarojrani Pattnaik, Mihir Kumar Sutar (2021). "Tensile properties and regression analysis of natural fiber and intralaminar mat reinforcement". Materials Today: Proceedings, vol. 44(1), pp. 1783-1787. (Scopus).
  266. S. K. Pattnaik, M. Behera, S. Padhi, P. R. Dash, S. K. Sarangi Study of cutting force and tool wear during turning of aluminium with WC, PCD and HFCVD coated MCD tool Manufacturing Review, EDP Sciences 1.44 SCOPUS 7 (2020) 27 August 2020 https://doi.org/10.1051/mfreview/2020026
  267. Gupta,A., Mishra, P.C.(2019) Optimization of emission characteristics of spark ignition engine with chambered straight muffler running in methanol blend:An engine development technique for environmental sustainability. Journal of Cleaner Production, 238. https://doi.org/10.1016/j.jclepro.2019.117778 (IF -7.051)
  268. Mishra PC and Kumar S (2019) Modeling for Design Optimization of Piston Crown Geometry Through Structural Strength and Lubrication Performance Correlation Analysis. Front. Mech. Eng. 5:17. doi: 10.3389/fmech.2019.00017 (IF -***) .
  269. Sarojrani Pattnaik, Mihir Kumar Sutar (2021). "Analysis of surface roughness of high carbon steel by WEDM". Materials Today: Proceedings, vol. 44(1), pp. 1765-1769. (Scopus).
  270. M. Behera, A. Jena, S. K. Pattnaik, S. Padhi, S. K. Sarangi The effect of transition-metal seeding powder on deposition and growth of diamond synthesized by hot filament chemical vapor deposition processes on cemented carbide substrates and its characterization Materials Chemistry and Physics, Elsevier Science 3.47 SCOPUS 256 (2020) 123638 August 2020 10.1016/j.matchemphys.2020.123638
  271. D. K. Sahu, S. K. Sarangi, K. U. Sri Influence of substrate bias on performance of diamond coating on WC cutting inserts for machining of aluminium by HFCVD process International Journal of Materials Engineering Innovation, Inderscience SCOPUS 11 Issue 4 (2020) 293-308 https://dx.doi.org/10.1504/IJMATEI.2020.112096
  272. Prafulla Kumar Sahoo, Sarojrani Pattnaik, Mihir Kumar Sutar (2021). "Investigation of the Foundry Properties of the Locally Available Sands for Metal Casting". Sillicon, https://doi.org/10.1007/s12633-020-00677-x. SCI, Impact Factor:2.670.
  273. Mishra, P.C., Kar, S., Mishra, H.(2018) “Effect of perforation on exhaust performance of a turbo pipe type muffler using methanol and gasoline blended fuel: A step to NOx control” Journal of Cleaner Production, 183,869-879.https://doi.org/10.1016/j.jclepro.2018.02.236  (IF -7.051)
  274. Barik, H. and Chatterjee, A., “Existence criteria for reflections in shock−vortex interactions.” Shock Waves, 16, (2007), 309-320.
  275. Mishra P.C.(2015) “FEM analysis for coating strength of a piston compression ring in contact with cylinder line: A Tribodynamic analysis”Tribology in Industry, 37(1), pp.42-54.(SNIP-1.44)
  276. Arup GourabSahoo, Santosh Kumar Sahu, ChhabiRam Matawale, SauravDattaand SibaSankarMahapatra, (2014) A Fuzzy Based Decision Support Framework Towards Benchmarking of Enterprise (SupplyChain) Agility: AnEmpiricalResearch, International Journal of Management and International Business Studies, 4(2), 149-158.Research India Publications, NewDelhi. ISSN 2277-3177
  277. B.B. Satapathy ,J.Rana and K.P.Maity,"Numerical prediction of hole profile in laser drilling process and experimental validation",International Journal of Advanced Manufacturing Technology,Published online on 28th Oct.-2016.
  278. Ghoshdastidar P S, Kabelac S and Mohanty A, Numerical modeling of atmospheric pool boiling by the coupled map lattice method, Journal of Mechanical Engineering Science, Part C, Feb 2004, Pages195-05,doi:https://doi.org/10.1243/095440604322886946
  279. Mihir Kumar Sutar, Sarojrani Pattnaik (2010). “Vibration Characteristics of a Cracked Cantilever Beam under Free Vibration,” Noise & Vibration Worldwide, vol. 41(9), pp. 16- 21 (Scopus).
  280. Sarojrani Pattnaik and Dr. M.S.Khan, Application of TQM to Assure Supply Chain Security, International Journal of Advanced Engineering Applications, 1 (2), 1-14, 2008.
  281. Singh BN, Vyas N, Dash P. Stochastic free vibration analysis of smart random composite plates.Structural Engineering and Mechanics. 2009; 31 (5): 481-506
  282. S. Padhi, M. Behera, S. K. Pattnaik, S. K. Sarangi Diamond Thin Film Coating on WC Substrate by HFCVD Method using Different Seeding Powders and Its Characterization International Journal of Recent Technology and Engineering SCOPUS 8 Issue-2 (2019) 5175-5180 10.35940/ijrte.B3169.078219
  283. Mihir Kumar Sutar, Abinash Nayak. (2020). "Composites and Effects of Discontinuities on Its Performance: A Review", Journal of The Institution of Engineers (India): Series C, vol. 101, pp. 203-217. (Scopus).
  284. Gupta A. and Mishra P.C. (2017) “Emission and Friction Analysis of IC engine running in Methanol Blend” Oxidation Communications,  41(1) (IF -0.48)
  285. Mishra P.C. (2017) “Computational Fluid Dynamics Model for Geometric Optimisation of Reflective Sound Cancellation Type Exhaust Muffler, Journal of Balkan Tribological Association,4(1310-4772):592 (IF -0.737)
  286. Prafulla Kumar Sahoo*, Sarojrani Pattnaik, Mihir Kumar Sutar (2020). Investigation on the Influence of Different Additives on Properties of Green Sand Mould. Materials Science Forum, Vol. 978, pp. 29-33. (Scopus).
  287. R. Kumar, S. K. Pattnaik, J. K. Minz, S. Padhi, S. K. Sarangi Influence of cutting parameters on cutting forces and surface roughness in dry turning of Al. using PCD and different coated tools Sadhana, Academic of Sciences, Springer 0.592 44 (2019) 186 10.1007/s12046-019-1155-4Sadhana(0123456789().,-volV)F]T(30123456789().,-volV)
  288. Prafulla Kumar Sahoo*, Sarojrani Pattnaik, Mihir Kumar Sutar (2019). "A State-of-the-Art Review on Manufacturing and Additive Influences on Sand-Cast Components". Arabian Journal for Science and Engineering, Vol. 44, pp. 9805-9835. SCI, Impact Factor: 2.334.
  289. Sarojrani Pattnaik, An Investigation on Enhancing Ceramic Shell Properties using Naturally Available Additives, International Journal of Advanced Manufacturing Technology, DOI 10.1007/s00170-016-9975-4.
  290. S. K. Pattanik, N. K. Bhoi, S. Padhi, S. K. Sarangi Dry machining of aluminium for proper selection of cutting tool: tool performance and tool wear The International Journal of Advanced Manufacturing Technology, Springer 1.568 98 (2018) 55 10.1007/s00170-017-0307-0
  291. Kumar S. and Mishra P.C. (2016) “ Finite element modeling for structural strength of quadcoptor type multi-mode vehicle” Aerospace Science and Technology 53, pp.252-266. https://doi.org/10.1016/j.ast.2016.03.020 (IF -3.001)
  292. Mishra P.C., Kar S, Mishra H, Gupta A (2016) Modeling for combined effect of muffler geometry modification and blended fuel use on exhaust performance of a four stroke engine: A Computational Fluid Dynamics approach” Applied Thermal Engineering ,108(5), pp.1105-1118. DOI: 10.1016/j.applthermaleng.2016.08.00   (IF -4.026)
  293. Mihir Kumar Sutar, Pushpraj Mani Pathak (2019). Hybrid trajectory/force control strategy for the in vivo robot during stomach biopsy, Journal of the Brazilian Society of Mechanical Sciences and Engineering volume 41, 440, https://doi.org/10.1007/s40430-019- 1954-x, SCI, Impact Factor: 2.22.
  294. Sarojrani Pattnaik, D.B. Karunakar and P.K. Jha, Developments in investment casting process-A review, Journal of Materials Processing Technology, 212, 2332–2348, 2012.
  295. P. R. Dash, K. Ray, S. K. Sarangi, P. K. Pradhan Analysis of Static Instability of an Asymmetric, Rotating Sandwich-Beam Advances in Acoustics and Vibration Open Access 2012 (2012) 191042 10.1155/2012/191042
  296. Madan Mohan Behera, Sarojrani Pattnaik, Mihir Kumar Sutar (2019). "Thermo-mechanical analysis of investment casting ceramic shell: A case study". Measurement, Vol. 147:106805. SCI, Impact Factor:5.2.
  297. Sarojrani Pattnaik, D.B. Karunakar and P.K. Jha, Multi-characteristic optimization of wax patterns in the investment casting process using grey–fuzzy logic, International Journal of Advanced Manufacturing Technology, 67, 1577–1587, 2013.
  298. ThrinadhJadam, Santosh Kumar Sahu, SauravDatta, ManojMasanta (2020)Powder-mixed electro-discharge machining performance of Inconel 718: effect of concentration of multi-walled carbon nanotube added to the dielectric media, Indian Academic of Sciences, Shadhana, 45(135), 1-16, Springer.DOI.10.1007/s12046-020-01378-2.
  299. Rana J., Mishra P.K and Prasad B.V.S.S.S., "A Transient Three Dimensional Thermal Model for Laser Heat Treatment of Finite Size Work pieces’’ Journal of Materials Processing and Manufacturing Science, Vol-5, April, 1997, pp 283-293.
  300. S. K. Sarangi, A. Chattopadhyay, A.K. Chattopadhyay Influence of process parameters on crystal growth of diamond on cemented carbide substrates by HFCVD system Int. J. Refractory Metals and Hard Materials, Elsevier Science 1.989 31 (2012) 1 10.1016/j.ijrmhm.2011.07.007
  301. Mishra P.C. (2014) “Modeling for route cause of engine friction loss: Transient elastohydrodynamics of piston compression ring and cylinder liner lubricated contact”Applied Mathematical Modeling, 37(8), pp.5896-5912. https://doi.org/10.1016/j.apm.2014.10.011  (IF -3.112)
  302. Mishra P.C.(2012) “Mathematical modeling of stability in rough elliptic bore misaligned journal bearing considering thermal and non-Newtonian effects”Applied Mathematical Modeling, 37(8), pp.5896-5912. https://doi.org/10.1016/j.apm.2012.11.020 (IF -3.112)
  303. Rana J., Prasad B.V.S.S.S and Mishra P.K., "Case Hardening of Laser Treated Steel Specimen Using Energy Integral Method". Journal of Materials Processing and Manufacturing Science, Vol-6, Jan, 1998, pp229-238.
  304. A. K. Chattopadhyay, P. Roy, S. K. Sarangi Study of wettability test of pure aluminum against uncoated and coated carbide inserts Surface and Coatings Technology, Elsevier Science 2.135 204 (2009) 410 10.1016/j.surfcoat.2009.07.038
  305. Swain PR, Dash P, Singh BN. Stochastic nonlinear bending analysis of piezoelectric laminated composite plates with uncertainty in material properties. Mechanics Based Design of Structures and Machines. 2021; 49 (2): 194-216
  306. Prabhat Pradhan, Mihir Kumar Sutar, Sarojrani Pattnaik (2019). "A state of the art in Functionally Graded Materials and their Analysis". Materials Today: Proceedings, Vol. 18(7), pp. 3931-3936. (Scopus).
  307. Sarojrani Pattnaik, D.B. Karunakar and P.K. Jha, Utility-Fuzzy-Taguchi based hybrid approach in investment casting process, International Journal of Interactive Design and Manufacturing, 8:77–89, 2014.
  308. ThrinadhJadam, Santosh Kumar Sahu, SauravDatta, ManojMasanta (2019) EDM performance of Inconel 718 superalloy: application of multi-walled carbon nanotube (MWCNT) added dielectric media, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41(8), 305-324. Springer Berlin Heidelberg. DOI: 10.1007/s40430-019-1813-9.
  309. DebashishSahu, Santosh Kumar Sahu, ThrinadhJadam, SauravDatta (2019)Electro‐Discharge Machining Performance of Nimonic 80A: An Experimental Observation,Arabian Journal for Science and Engineering, 44, 10155–10167.Springer Berlin Heidelberg. DOI: 10.1007/s13369-019-04112-1.
  310. Rana J., Goswami G.L., Jha S.K., Mishra P.K. and Prasad B. V.S.S.S. "Experimental studies on the microstructure and hardness of laser-treated steel specimens". Journal of Optics and Laser Technology, Vol- 39, 2007, pp 385-393.
  311. P. Roy, S. K. Sarangi, A. Ghosh, A.K. Chattopadhyay Machinability study of pure aluminium and Al-12% Silicon alloys against uncoated and coated carbide inserts Int. J. Refractory Metals and Hard Materials, Elsevier Science 1.989 27 (2009) 535 10.1016/j.ijrmhm.2008.04.008
  312. Manoj Kumar Dash, Santosh Kumar Senapati and Aurovinda Mohanty,"Natural Convection Around Three Horizontal Cylinders in Vertical Array: A Numerical Approach", Journal of Thermophysics and Heat Transfer,https://doi.org/10.2514/1.T6925
  313. Sasmita Kar, Saojrani Pattnaik, Mihir Kumar Sutar (2019). "Development of Pseudo ductile behavior of carbon fiber reinforced composites-An Overview". Materials Today: Proceedings, Vol. 18(7), pp. 4315-4321. (Scopus).
  314. Sarojrani Pattnaik, D.B. Karunakar and P.K. Jha, Influence of injection process parameters on dimensional stability of wax patterns made by the lost wax process using Taguchi approach, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications, 227(1) 52–60, 2012.
  315. AdhikariB, DashP, SinghBN. Buckling analysis of porous FGM sandwich plates under various types nonuniform edge compression based on higher order shear deformation theory. Composite Structures 2020; 251: 112597
  316. Mishra, P. C.(2012) “Tribodynamic modeling of piston compression ring and cylinder liner conjunction in high pressure zone of engine cycle” International Journal of Advanced Manufacturing Technology: 66(5-8), pp. 1075-1085.DOI:10.1007/s00170-012-4390-y(IF -2.75)
  317. Mishra, P. C.,Rahnejat, H. and King, P.D., (2009) “Tribology of ring-bore conjuction subjected to mixed regime of lubrication” IMechE, Part.C, Journal of Mech.Engg.Sc., 223,pp.987-998. DOI: 10.1243/09544062JMES1220.(IF -1.359)
  318. Rana J., Suar S. and Bhoi R.K., "Optimization of Process Parameters in Laser Drilling Using Taguchi Technique", International Journal of Manufacturing Technology and Research, Vol-4, No. 1-2, Jan- June 2008, pp. 77-78.
  319. A. K. Chattopadhyay, P. Roy, A. Ghosh, S. K. Sarangi Wettability and machinability study of pure aluminum towards uncoated and coated carbide cutting tool inserts Surface and Coatings Technology, Elsevier Science 2.135 203 (2009) 94110.1016/j.surfcoat.2008.08.047
  320. Mohanty, Aurovinda, Santosh Kumar Senapati, Viplove Ranjan Ganguly, and Manoj Kumar Dash. “Computation of Natural Convection Heat Transfer from an Infrared Suppression Device (IRS) with Multiple Louvered Cylindrical Funnels.” Numerical Heat Transfer, Part A: Applications, (2024), 1–17. doi:10.1080/10407782.2024.2328763.
  321. Santosh Kumar Sahu, SauravDatta (2018) Experimental Studies on Graphite Powder Mixed Electro-Discharge Machining of Inconel 718 Super Alloys: Comparison with Conventional EDM, Proceedings of the iMeche, Part E: Journal of Process Mechanical Engineering. SAGE. DOI: 10.1177/0954408918787104.
  322. Adhikari, B, Dash P. Geometrically nonlinear free vibration analysis of laminated composite plates: A finite element assessment of a higher order non-polynomial shear deformation theory. Mechanics of Advanced Materials and Structures. 2019; 1-12
  323. Alok Ranjan Pradhan, Sarojrani Pattnaik, Mihir Kumar Sutar (2019). "Improving the Filling System for a Defect Free Casting: A Review". Materials Today: Proceedings, Vol. 18(7), pp. 2887-2892. (Scopus).
  324. Sarojrani Pattnaik, D.B. Karunakar and P.K. Jha, Optimization of multiple responses in the lost wax process using Taguchi method and grey relational analysis, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications, 227(2) 156-167, 2012.
  325. Sarojrani Pattnaik, Mihir Kumar Sutar (2019). "Graphene Base Nanocomposites: An overview". Materials Today: Proceedings, Vol. 18(7), pp. 5432-5437. (Scopus).
  326. Sarojrani Pattnaik, P.K. Jha, D.B. Karunakar, A review of rapid prototyping integrated investment casting processes, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications, DOI: 10.1177/1464420713479257, 2013.
  327. Santosh Kumar Sahu, ThrinadhJadam, SauravDatta, Goutam Nandi (2018) Effect of using SiC powder-added dielectric media during electro discharge machining of Inconel 718 super alloys, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40(7), 330-349. Springer Berlin Heidelberg. DOI:10.1007/s40430-018-1257-7
  328. Rana J., Prasad B.V.S.S.S. and Mishra P.K., "Optimization of Process parameters for CO2 Laser transformation hardening", Published in International Journal of Manufacturing Technology and Research, Vol. 4, No. 3-4, July- Dec, 2008, pp. 75-81.
  329. A. Chattopadhyay, S. K. Sarangi, A. K. Chattopadhyay Effect of negative dc substrate bias on morphology and adhesion of diamond coating synthesised on carbide turning tools by modified HFCVD method Applied Surface Science, Elsevier Science 2.711 255 (2008) 1661 10.1016/j.apsusc.2008.04.065
  330. Rahul Ray, Aurovinda Mohanty*, Pandab Patro, Santosh Kumar Senapati"Performance improvement of a heat sink with triangular slotted and interrupted fins: A computational study",Applied Thermal Engineering,Volume 230, Part B, 2023,DOI:https://doi.org/10.1016/j.applthermaleng.2023.120783
  331. Sahu SK, Pal K, Mahto RP, Dash P. Monitoring of friction stir welding for dissimilar Al 6063 alloy to polypropylene using sensor signals. The International Journal of Advanced Manufacturing Technology. 2019;104 (1-4): 159-177
  332. Mishra, P. C., Rahnejat, H. and Balakrishnan, S., (2008) “Tribology of Piston compression ring and cylinder contact at reversal” IMechE, Part.J,Engineering Tribology, 222(7), pp.815-826. DOI: 10.1243/13506501JET410 (IF -1.137)
  333. Swain PR, Adhikari B, Dash P. A higher-order polynomial shear deformation theory for geometrically nonlinear free vibration response of laminated composite plate. Mechanics of Advanced Materials and Structures. 2019; 26 (2): 129-138
  334. Mihir Kumar Sutar, Sarojrani Pattnaik (2015). “Neural Based Controller for Smart Detection of Crack in Cracked Cantilever Beam”, Materials Today: Proceedings, vol. 2(4-5), pp. 2648-2653. (Scopus).
  335. Sarojrani Pattnaik, D.B. Karunakar and P.K. Jha, A prediction model for the lost wax process through fuzzy-based artificial neural network, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, DOI: 10.1177/0954406213507701, 2013.
  336. Santosh Kumar Sahu, SauravDatta,SarojKumar Patel, SibaSankarMahapatra, (2015) Appraisement and Benchmarking of Supply Chain Performance Extent: A Fuzzy Grey Relation Method, Grey Systems, Theory and Application, 5(1), 2-30, Emerald Group Publishing Limited, UK. DOI:10.1108/GS-10-2014-0036
  337. Rana J. and Pradhan P., "Optimization of Process Parameters for Ductile and Brittle materials in Surface Grinding", Published in the International Journal for Manufacturing Technology and Research, Vol. 5, No. 1-2, Jan-July, 2009, pp. 74-80.
  338. S. K. Sarangi, A. Chattopadhyay, A. K. Chattopadhyay Effect of pretreatment, seeding and interlayer on nucleation and growth of HFCVD diamond films on cemented carbide tools Int. J. Refractory Metals and Hard Materials, Elsevier Science 1.989 26 (2008) 220 10.1016/j.ijrmhm.2007.05.002
  339. Aurovinda Mohanty, Santosh Kumar Senapati and Manoj Kumar Dash, “Cooling Characteristic of an Infrared Suppression Device with Single Perforated Funnel: A Computational Fluid Dynamics Approach”, Journal of Thermal Science and Engineering Applications; 2023, Volume 15, issue1, Pages: 1-10.DOI: https://doi.org/10.1115/1.4055263.
  340. Mishra, P. C., (2007) “Thermal Analysis of Elliptic Bore Journal Bearing”Tribology Transaction STLE, 50, pp 137-144.DOI:10.1080/10402000601105573.(IF -1.723)
  341. Gupta A. and Mishra P.C. (2017) “Emission and Friction Analysis of IC Engine Running in Methanol Blend” Tribology in Industry , https://doi.org/10.24874/ti.2018.40.01.02   (SNIP -1.44)
  342. 04
  343. Mahapatra S.K. and Barik H., “Numerical modelling of combined conductive and radiative heat transfer within square enclosure using discrete ordinate method.” Journal of Engineering Thermophysics, Vol. 11-2, (2002), pp. 181-194.
  344. Aditya, Santosh Kumar Sahu, AnoopKumar Sahu, SauravDatta, SibaSankarMahapatra, (2014) A decision Support System towards Suppliers’ SelectioninResilient Supply Chain: Exploration of Fuzzy- TOPSIS, International Journal of Management and International Business Studies, 4(2), 149-158. Research India Publications, New Delhi. ISSN 2277-3177
  345. Dash P, Singh BN. Second-order statistics of large-amplitude free vibration of a random composite plate. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering. 2009; 223 (8): 1099-1113
  346. I Nayak, J Rana and A.Parida., "Performance Optimization in Electro Discharge Machining using a suitable multi-response optimization techinque", Published online on 9th Dec.-2016 in Decision Science Letter (Volume-6-2017,pp 283-294).
  347. Mohanty A, Dash S K, Roy S, Natural convection cooling of an infrared suppression (IRS) device with cylindrical funnels, International journal of thermal sciences, Volume 141, July 2019, Pages 103-113,doi:https://doi.org/10.1016/j.ijthermalsci.2019.03.032
  348. Sarojrani Pattnaik, Mihir Kumar Sutar (2010). "Supply Chain Integration in Relation to Manufacturing," International Journal of Manufacturing Technology and Industrial Engineering, vol. 1 (1), pp.79- 84.
  349. Sarojrani Pattnaik and Mihir Kumar Sutar, Supply chain integration in relation to manufacturing industries, International Journal of Manufacturing Technology and Industrial Engineering (IJMTIE), 1(1), 79-84, 2010.

National Publications

    2018
  1. P. Patro, A. Rout and A. Barik, Numerical heat transfer prediction for laminar flow in a circular pipe with a 90-degree bend, Journal of the Institution of Engineers (India): Series C, 99(3), 323-327 (2018).
    2. 2007
  2. P. Patro, A. Dewan and L. Dayanand, Thermal Performance of a Circular Pin Fin Compact Heat Exchanger, International Journal of Chemical Sciences, 5 (2007) 1929-1937.
  3. NIL
  4. NIL
  5. NIL
  6. 01
  8. NIL
  9. NIL
  10. NIL
  11. 01