TRIBOLOGY,CONDITION MONITORING and MACHINE DESIGN

1. Teaching : 18 years
2. Research : 19 years
3. Industry : 2.5 years

Graduate Level	:	ADVANCED MECHANICS OF SOLIDS, MACHINE DESIGN
Post Graduate Level	:	TRIBOLOGY, THEORY OF ELEASTICITY AND PLASTICITY

TRIBOLOGY, CONDITION MONITORING and MACHINE ELEMENT DESIGN

Ph. D. Candidates	:	05 AWARDED 00 SUBMITTED 02 COTINUING
M. Tech. Candidates	:	30 Completed , 01 Continuing

ASME, AGMA, SAE, ISTE, AMM Life Time Member, ACEEE

International Publications

2025
1. Alam J , Panda S*, Nanda P, Dash P, Bibliometric insights into spur gear wear: Trends, detection techniques and sustainable design,Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, https://doi.org/10.1177/09544070251358126
2. Rath D, Panda S*, Grey relational analysis during sustainable machining of D3 tool steel, International Journal on Interactive Design and Manufacturing (IJIDeM), 1-16, https://doi.org/10.1007/s12008-025-02419-y
2024
3. J Alam, S Panda Exploring Tribological Behaviors of Profile-Shifted Spur Gears: An Experimental Investigation,2024, https://doi.org/10.1080/10402004.2024.2369185
2023
4. J Alam, S Panda A comprehensive study on multi-objective design optimization of spur gear,Mechanics Based Design of Structures and Machines 51 (9), 5272-5298
2022
5. A comparative study of meta-heuristics for local path planning of a mobile robot
6. Analysis and prediction of tool wear in dry turning of hardened D3 steel using hybrid insert: A novel wear map approach
7. Performance Analysis of Hybrid Ceramic Insert in Dry Turning of Hardened Tool Steel
8. A multi‐objective approach for local path planning of autonomous mobile robot based on metaheuristics
9. A comprehensive review on design and analysisof spur gears
2021
10. Optimum design of 3R manipulator using hybrid PSOGSA algorithm
11. A comprehensive study on multi-objective design optimization of spur gear
2020
12. An approach for design optimization of 3R manipulator using Adaptive Cuckoo Search algorithm
13. Particle Swarm Optimization and Machinability Aspects during Turning of Hardened D3 Steel
14. Laser micro drilling of 316L stainless steel orthopedic implant: A study
15. Modeling and optimization of rolling process: A multi-objective approach
16. WEDM microdrilling of 316 L stainless steel orthopedic implant
17. Reviewer acknowledgments and awards: Recognition awards for distinction of reviewing in 2019
2019
18. Workspace optimisation of 3R manipulator-a multi-objective approach
19. A comparative study of stability characteristics of mahua and jatropha biodiesel and their blends
20. Dry turning of AISI D3 steel using a mixed ceramic insert: A study
2018
21. Sourav Kumar Sahu , Sumanta Panda and Ajit Kumar Pattanaik An Algorithm for Online Path Planning of Mobile-Robot based on Displacement Vector Method, International Journal of Advanced Mechanical Engineering. Volume 8, Number 1 (2018), pp. 275-284
22. S Panda, SN Panda A multi objective optimum design approach for rolling element bearing International Journal on Interactive Design and Manufacturing (IJIDeM) 12 (3) 1095–1108 (2018)
23. Biodiesel from Non-Edible Vegetable Oils: A Review on Engine Performance and Emission Characteristics
24. Process parameter optimization of hydrostatic extrusion using metaheuristic
25. Laser beam micro drilling–a review
2017
26. S Panda, BB Biswal, SD Jena, D Mishra An approach to weight optimization of a spur gear Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 232(2) 189-202
27. N Acharya, P Nanda, S Panda, S Acharya Analysis of properties and estimation of optimum blending ratio of blended mahua biodiesel Engineering Science and Technology, an International Journal 20 (2), 511-517
2015
28. S Panda, D Mishra, BB Biswal, P Nanda Optimization of multiple response characteristics of EDM process using taguchi-based grey relational analysis and modified PSO Journal of Advanced Manufacturing Systems 14 (03), 123-148
29. S Panda, SN Panda, P Nanda, D Mishra Comparative study on optimum design of rolling element bearing Tribology International 92, 595-604
2014
30. S Panda, D Mishra, BB Biswal, M Tripathy Revolute manipulator workspace optimization using a modified bacteria foraging algorithm: A comparative study Engineering Optimization 46 (2), 181-199
2012
31. S Panda, D Mishra, BB Biswal, BB ChoudhuryRobot workspace optimization using a novel modified differential evolutionary technique International Journal of Computational Methods 9 (03), 1250034
32. S Panda, D Mishra, BB Biswal Revolute manipulator workspace optimization: A comparative study Applied Soft Computing 13 (2), 899-910
2011
33. S Panda, D Mishra, BB Biswal Determination of optimum parameters with multi-performance characteristics in laser drilling—a grey relational analysis approach The International Journal of Advanced Manufacturing Technology 54 (9), 957-967
2010
34. S Panda, D Mishra Test-Rigs for Dynamically Loaded Journal Bearing: A Study SAE Technical Paper
35. S Panda, D Mishra Development of a tribological failure knowledge model International Journal of Knowledge Engineering and Data Mining 1 (2), 99-114
2009
36. S Panda, D Mishra A multi-objective optimum design of dynamically loaded journal bearing for a prescribed π extent film SAE Technical Paper

03

1. Co-coordinator National Seminar on Recent Advances in Material Science RAIMS-13 2. Co-coordinator National Seminar on Recent Advances in Material Science RAIMS-14 3. Coordinator, Workshop on Entrepreneurship Development and challenges-2016 4. Coordinator, Workshop on Management capacity enhancement- A Technical education prospective 5. Nanotechnology: Present and Future Aspects in Science and Engineering (NASE-16) as the capacity of Co-coordinator 6. Coordinator, Skill Development Programme for Welding,27th June - 2nd July 2016. 7. Coordinator, Skill Development Programme for Welding, 2017 7. Coordinator, Workshop on Management capacity enhancement-A Technical education perspective-09–10.04.2016 8. Coordinator TEQIP Sponcer STC on Recent Developments In Plant Maintenance And Condition Monitoring Of Machinery (Rdpmcmm) 10-04-2017 To 15-04-2017 9. Coordinator NEP-2020

HOD, Mechanical Engineering Co-ordinator T&P, Comitee for conducting Examination, HOD, PE Department, HOD, Chemical Engineering Departmenet, BOS member of Production Engineering, DAC member Production Engg. DAC member Mechanical Engg, Member Academic Council, Member DSC, Member DPC, Member Conducting board.

• Reviewer of Professional Journals:
  1. Applied soft Computing, Elsevier.
  2. Engineering Optimization, Taylor & Francis.
  3. Journal of Mechanical Science Part C, IMechE.
  4. International Journal of Advanced Manufacturing Technology, Springer.
  5. International Journal of Structure and Multi-Disciplinary Optimization,Springer.
  6. SAE Transaction.
  7. International Journal of Industrial Robot, Emerald.
  8. Robotica Cambridge Press.
  9. Robotics & Computer Integrated Manufacturing,Elsevier.
  10. Journal of Experimental & Theoretical Artificial Intelligence.
  11. Mechanism and Machine Theory, Elsevier.
  12. Journal of Brazillian society of Mechanical science & Engineering,Springer.
  13. Tribology in Industry, Journal of the Serbian Tribology Society.
  14. BioMed research journal, Hindawi.
  15. Int. . of Manufacturing Technology Management, Inderscience.
  16. Journa of King saud University- Engineering Science, Elsevier.
  17. National academic science letter.Springer.
  18. Mechanics Based Design of Structures and Machines, An International Journal,Taylor & Francis
  19. Journal of Testing and Evaluation, ASTM
  20.  
  21. Book Proposal: Integrated Long term forecasting, Elsevier.
• Project Reviewer
  Fast Track Project DST

Present Address :  Dr. S. Panda C/O B.K.Panda At- Charbhati Po/Dist- Sambalpur-768001

Permanent Address :  Dr. S. Panda C/O B.K.Panda At- Charbhati Po/Dist- Sambalpur-768001