News and Events View All

15, Jul
2026

Dr. Manila Mallik received " NPTEL discipline star award" for the session (Jan–Apr 2026) at IIT Kharagpur held on 12.7.2026
Download
14, Jul
2026

VSSUT Receives NPTEL 'AA Category' Institution Award by NPTEL (Jan–Apr 2026) at IIT Kharagpur held on 11.7.2026
Download
02, Jul
2026

VSSUT Celebrates 17th University Foundation Day with Academic Seminar and Van Mahotsav
Download

People @ VSSUT

Research and Development

Publications
Sponsored Project

Mohapatra, D. R., Nanda, A, Sridhar, B., Panigrahi, S. K. (2026): Critical ferrochrome slag fine aggregate replacement level estimation in a GGBFS-fly ash blended precursor-based self-compacting geopolymer concrete, Journal of Sustainable Metallurgy (ISSN: 2199-3831), Springer, SCIE, Q1, IF: 3.5, https://doi.org/10.1007/s40831-026-01593-x

Mohapatra, D. R., Nanda, A, Sridhar, B., Panigrahi, S. K. (2026): Critical ferrochrome slag fine aggregate replacement level estimation in a GGBFS-fly ash blended precursor-based self-compacting geopolymer concrete, Journal of Sustainable Metallurgy (ISSN: 2199-3831), Springer, SCIE, Q1, IF: 3.5, https://doi.org/10.1007/s40831-026-01593-x
S. D. Das, S. Kumar, Gyan Ranjan Biswal, and T. Islam, “Condition Monitoring of Sulphur Hexafluoride Gas Insulated Switchgear Vessel using Smart Ultrasonic Sensor,” IEEE Transactions on Instrumentation and Measurement, Vol. 75, Art. 9701608, Mar. 2026. DOI: 10.1109/TIM.2026.367425 (IF: 5.9)

S. D. Das, S. Kumar, Gyan Ranjan Biswal, and T. Islam, “Condition Monitoring of Sulphur Hexafluoride Gas Insulated Switchgear Vessel using Smart Ultrasonic Sensor,” IEEE Transactions on Instrumentation and Measurement, Vol. 75, Art. 9701608, Mar. 2026. DOI: 10.1109/TIM.2026.367425 (IF: 5.9)
Das, P. P., Padhiari, S., & Das, S. R. (2026). Experimental investigation and optimization of technological performance characteristics in 3D printing of ABS/PC composite polymer. Journal of Thermoplastic Composite Materials. Advance online publication.

Das, P. P., Padhiari, S., & Das, S. R. (2026). Experimental investigation and optimization of technological performance characteristics in 3D printing of ABS/PC composite polymer. Journal of Thermoplastic Composite Materials. Advance online publication.
Mishra, S., Sahu, S. K., & Das, S. R. (2026). Comparative performance evaluation between conventional tool and textured tool in turning of AISI 6150 steel under minimum quantity lubrication. Journal of Materials Engineering and Performance, 1–20.

Mishra, S., Sahu, S. K., & Das, S. R. (2026). Comparative performance evaluation between conventional tool and textured tool in turning of AISI 6150 steel under minimum quantity lubrication. Journal of Materials Engineering and Performance, 1–20.
Roy, S., Swain, S., Das, A., & Das, S. R. (2026). Performance of AlTiN- and AlTiSiN-coated carbide tools in dry turning of hardened AISI 4140 steel: A comparative investigation. Journal of Materials Engineering and Performance, 35(3), 2971–2992.

Roy, S., Swain, S., Das, A., & Das, S. R. (2026). Performance of AlTiN- and AlTiSiN-coated carbide tools in dry turning of hardened AISI 4140 steel: A comparative investigation. Journal of Materials Engineering and Performance, 35(3), 2971–2992.

View All Publications

AICTE - MODROB project costing Rs 2.8 lakhs for â€œMachining Performance Evaluation of CVD/PVD Coated Carbide Al2O3 ceramics and CBN/Diamond cutting tool insertsâ€. (in June 2014).

AICTE - MODROB project costing Rs 2.8 lakhs for â€œMachining Performance Evaluation of CVD/PVD Coated Carbide Al2O3 ceramics and CBN/Diamond cutting tool insertsâ€. (in June 2014).
AICTE - MODROB project costing Rs 7.56 lakhs for â€œModernization of Materials Research Laboratoryâ€ (2010-2013).

AICTE - MODROB project costing Rs 7.56 lakhs for â€œModernization of Materials Research Laboratoryâ€ (2010-2013).
In the capacity of H.O.D. : I was looking after for the purchase and installation of two major equipments (i.e. Instron make UTM of 10 ton capacity and Piezo-electric Force Dynamometer) costing Rs 55 lakhs funded by DST-FIST (from February 2009 to July 2014).

In the capacity of H.O.D. : I was looking after for the purchase and installation of two major equipments (i.e. Instron make UTM of 10 ton capacity and Piezo-electric Force Dynamometer) costing Rs 55 lakhs funded by DST-FIST (from February 2009 to July 2014).
Funding Agency (Scheme) Year : UGC-MRP-2013Title : Development of a high vacuum brazing furnace for joining metals to ceramicsPI/Co-PI : PIDuration(years) : 3.0Amount Sanctioned(In Lakhs) : 14.97Status - completed / ongoing : Completed

Funding Agency (Scheme) Year : UGC-MRP-2013Title : Development of a high vacuum brazing furnace for joining metals to ceramicsPI/Co-PI : PIDuration(years) : 3.0Amount Sanctioned(In Lakhs) : 14.97Status - completed / ongoing : Completed
Funding Agency (Scheme) Year : CSIR-ERD-2013Title : Development of NCD and UNCD diamond coatings and their characterization on cemented carbide insertsPI/Co-PI : PIDuration(years) : 3.0Amount Sanctioned(In Lakhs) : 21.92Status - completed / ongoing : Completed

Funding Agency (Scheme) Year : CSIR-ERD-2013Title : Development of NCD and UNCD diamond coatings and their characterization on cemented carbide insertsPI/Co-PI : PIDuration(years) : 3.0Amount Sanctioned(In Lakhs) : 21.92Status - completed / ongoing : Completed